Playing A Disc; Usb Devices; Playing Back A Usb Device - Sony MEX-BT4000P Operating Instructions Manual

CD

Playing a disc

This unit can play CD-DA (also containing
CD TEXT) and CD-R/CD-RW (MP3/
WMA/AAC files (page 38)).
1
Insert the disc (label side up).
Playback starts automatically.
To eject the disc, press .
Note
When ejecting/inserting a disc, keep any USB
devices disconnected to avoid damage to the disc.
Changing display items
Press .
Displayed items may differ depending on
the disc type, recording format and settings.

USB devices

• MSC (Mass Storage Class)-type USB
devices compliant with the USB standard
can be used.
• Corresponding codec is MP3 (.mp3),
WMA (.wma), AAC (.m4a) and AAC
(.mp4).
• Backup of data to a USB device is
recommended.
For details on the compatibility of your USB
device, visit the support site on the back
cover.
Note
Connect the USB device after starting the engine.
Depending on the USB device, malfunction or
damage may occur if it is connected before
starting the engine.

Playing back a USB device

1
Open the USB cover, then connect the
USB device to the USB connector with
its USB cable (not supplied).
Playback starts.
If a USB device is already connected, to start
playback, press  repeatedly
until "USB" appears.
To stop playback, press and hold
 for 1 second.
To remove the USB device, stop the USB
playback, then remove the USB device.
13