ESI FlexCharge FCHHUB-ES Series Installation Instructions Manual

Advertisement

Quick Links

Installation instructions
FCHHUB-ES
• Edge
• Evolve
• Sena
• SenaEX
FCHHUB-K2
• Kata2
• Kata2-MS
FlexCharge
Desktop charging station
Model # FCHHUB-ES-___
Model # FCHHUB-K1-___
Model # FCHHUB-K2-___
FCHHUB-K1
• Kata
• KataEX
Hub
ES/K1/K2
___ = SLV, BLK or WHT

Advertisement

Table of Contents
loading

Summary of Contents for ESI FlexCharge FCHHUB-ES Series

  • Page 1 FlexCharge ™ ES/K1/K2 Installation instructions Desktop charging station Model # FCHHUB-ES-___ Model # FCHHUB-K1-___ FCHHUB-ES Model # FCHHUB-K2-___ • Edge ___ = SLV, BLK or WHT • Evolve • Sena • SenaEX FCHHUB-K1 • Kata • KataEX FCHHUB-K2 • Kata2 •...
  • Page 2: Safety Instructions

    • DO NOT use if power cord or transformer is damaged. • Keep the wireless charging surface clean and dry. • Use a soft, clean, dry cloth to clean the surface of the wireless charger. • Compatible with ESI Kata, Sena, Edge and Evolve series monitor arms. Specifications Port...
  • Page 3 FlexCharge Hub Components Please review these instructions before beginning the installation. Check that all the components needed for your installation were provided with your order. The components provided vary depending on the specific hub model. Do not discard the packaging until the product works to your satisfaction. Components Model FCHHUB-ES rear cover...
  • Page 4: Installation

    FlexCharge Hub Installation Installation of the FlexCharge Hub is quick and easy. No disassembly of the monitor arm is required. Simply follow the steps below. Step #1: remove the rear cover • The rear cover on Model FCHHUB-ES slides off the charging pad. •...
  • Page 5 FlexCharge Hub Installation Step #3: plug the power supply connector into the charging pad • Plug the barrel connector on the power supply into the port at the rear of the charging pad. • Do not plug the power supply into an outlet until after installation is complete. Step #4: install the charging pad onto the monitor arm base assembly •...
  • Page 6: Operation

    FlexCharge Hub Operation Use the FlexCharge Hub to charge your mobile device. • If your phone is Qi-enabled, simply place it onto the charging pad. — Review the manual for your device to see if it is Qi-enabled • You may also charge your phone using the appropriate USB port. phone on —...
  • Page 8 FlexCharge ™ ES/K1/K2 Desktop charging station Please contact Customer Service with any questions or comments at 800.833.3746 or visit our website at esiergo.com FCC NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 & 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This manual is also suitable for:

Flexcharge fchhub-k1 seriesFlexcharge fchhub-k2 series

Table of Contents