B&K Reference 50 Owner's Manual page 72

Link Zone 2 (B) input to Zone 1 (A) input selection - Zone 2 (B) input source selection may be linked with Zone
1 (A) source selections. In operation, whenever a source selection is detected (remote, front panel or RS-232) on
Zone 1 (A), source linkage will cause the source to be selected on both zones. Independent source selection is
still available with Zone 2 (B) remote control, but any Zone 1 (A) source selection supersedes the previous Zone 2
(B) selection.
From Remote
1 À(UP) or §(DOWN)
2 ¶ •
(LEFT) or (RIGHT)
Link Zone 2 (B) power to Zone 1 (A) power - Zone 2 (B) power On/Off may be linked to Zone 1 (A). In
operation, whenever power is set to On in Zone 1 (A) the power linkage feature will cause power to be set
accordingly on Zone 2 (B). Zone 2 (B) Independent power on/off is still operational with the Zone 2 (B) remote
control, but any Zone 1 (A) power command supersedes the previous Zone 2 (B) power on/off.
From Remote
1 À(UP) or §(DOWN)
¶ •
2
(LEFT) or (RIGHT)
3 MENU
ADVANCED ZONE B SETTINGS
1 Level Control Variable
2 Fixed Level +15 dB
3 Zone ID
4 V2 Output
5 Link Input to Zone A
5 Link Input to Zone A
6 Link Power to Zone A
next item adjust
MENU advanced setup
ZB LINK SRC
From Front Panel
(UP) or (DOWN)
VOLUME KNOB
ADVANCED ZONE B SETTINGS
1 Level Control Variable
2 Fixed Level +15 dB
3 Zone ID
4 V2 Output
5 Link Input to Zone A
6 Link Power to Zone A 6 Link Power to Zone A
next item adjust
MENU advanced setup
ZB LINK PWR
From Front Panel
(UP) or (DOWN)
VOLUME KNOB
MENU
68
2
Tape
No
No
No
NO
Action
move to Link Input to Zone 1 (A)
set to Yes or No
2
Tape
No
No No
NO
Action
move to Link Power to Zone 1 (A)
set to Yes or No
return to ADVANCED SYSTEM SETUP