Lucent Technologies Definity Callmaster II Programming The Options
Definity enterprise communications server (ecs) voice terminals
Hide thumbs
Also See for Definity Callmaster II:
- Operation manual (92 pages) ,
- Instructions manual (50 pages)
Related Manuals for Lucent Technologies Definity Callmaster II
Summary of Contents for Lucent Technologies Definity Callmaster II
- Page 1 Lucent Technologies DEFINITY® Enterprise Communications Server (ECS) CALLMASTER® II, CALLMASTER® III, and CALLMASTER® IV Voice Terminals Instructions for Programming the Options Bell Labs Innovations 555-015-172 Comcode 108123977 Issue 1 December 1997...
- Page 2 Copyright © 1997, Lucent Technologies All Rights Reserved Printed in U.S.A. Notice Every effort was made to ensure that the information in this book was complete and accurate at the time of printing. However, information is subject to change. Part 15: Class B Statement. The CALLMASTER® III and CALLMASTER® IV voice terminals have been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and CISPR-22.
- Page 3 Programming the Options Depending on the individual installation site and the needs of the telecommunications administrator, a service technician may be called upon to change the following settings for the CALLMASTER® II (602D), CALLMASTER® III (603D), or CALLMASTER® IV voice terminal.
- Page 4 A Shortcut in Programming the Options You may use the following keys to program the options: The [ ] key changes the option setting shown on the display and keeps the voice terminal in programming mode. The [ ] key stores the option setting shown and exits programming mode.
- Page 5 ENABLING/DISABLING THE MUTE BUTTON To enable or disable the Mute function 1 While on-hook (the headset must be unplugged), press [ The light next to [ 2 Press [ Mute The CALLMASTER set is in option programming mode. 3 Dial the 2-digit code, "68" ("MU"). The current setting (Enabled or Disabled) is shown on the display.
- Page 6 ENABLING OR DISABLING THE RECORD OUT SIGNAL To enable or disable the Record Out Signal 1 While on-hook (the headset must be unplugged), press [ The light next to [ 2 Press [ Mute The CALLMASTER set is in option programming mode. 3 Dial the 2-digit code, "73"...
- Page 7 5 When the setting you prefer is shown on the display, press [ save it and exit programming mode. NOTE: No recorder warning tones will be produced when the Record Out Signal is disabled regardless of the setting of these tones. SETTING THE HEADSET VOLUME CONTROL The following options are available for setting the headset volume: Per Plug —...
- Page 8 Lucent Technologies Bell Labs Innovations Copyright© 1997 Lucent Technologies All Rights Reserved...