Table of Contents
Advertisement
Select Ring (and Ringer Volume) (Continued)
You can raise or lower the volume of the tone ringer under the following
conditions:
The CALLMASTER is on-hook, and the headset is unplugged
The voice terminal is off-hook on the external speakerphone
A call is ringing at the voice terminal
You are in the process of selecting a personalized ringing pattern for
your voice terminal.
To adjust ringer volume if necessary
To raise the volume, press the right half of the volume control button
1
labeled
to lower the volume, press the left half of the volume control button
labeled
Display shows the volume level:
Ringer L > > > >
(There are eight possible volume settings. On the display,
one arrow indicates the lowest setting has been selected.
Eight arrows indicates the highest setting has been selected.)
SELF-TEST
To test the lights and ringer of your voice terminal
While on-hook, press
1
Green light next to
Press and hold
2
Three groups of lights go on in sequence
Ringer sounds
Display is activated
Drop
Release
3
Ringer, display, and lights return to pretest state; light next to
Select
;
.
H
Select
Select
Drop
Test
to end test
Test
goes off
goes on
22
Advertisement
Table of Contents
