Test; Transfer - Lucent Technologies Definity 8434DX User Manual

Definity communications system generic 2 and system 85, voice terminal
Hide thumbs Also See for Definity 8434DX:
Table of Contents

Advertisement

Test

To test the lights and the
display on your voice
terminal

Transfer

To send the present call to
another extension or
outside number
1
While on-hook or off-hook, press and hold
Green light next to
Note: If the green light next to
rather than goes on steadily, it means the voice
terminal is not communicating with the
DEFINITY switch or with System 85. In such a
case, see your system manager.
The button lights go on steadily in four groups,
and the display fills in all the segments
2
To end test, release
Lights return to pretest state; green light next to
goes off
Test
Note: If the display or the lights do not respond
during test, notify your system manager.
1
Press
Transfer
Present call is put on hold and the green light
next to the held call flutters
You are given a new call appearance
2
Dial the extension or number to which the call is to be
transferred
Remain on line and announce call if desired; if no
answer or number dialed is busy, return to held
call by pressing its call appearance
3
Press
again
Transfer
Call is sent to dialed extension or number
Note: Only calls from another extension can be sent
to an outside number; you cannot transfer a call
from an outside number to another outside number.
4
Hang up or press
goes on
Test
Test
Test
[ringback tone]
Drop
Test
flashes
[dial tone]
38

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents