Advertisement
Quick Links
Setting up the
Star Micronics Printer
Printer cover
Open to replace
paper. Do not
open while printing.
Power switch
Turns the printer
on and off.
Loading paper
The thermal paper used by the printer is 3 ⅛" in width. We recommend
using a longer roll so the paper does not have the be changed as often.
1
Push the cover open lever, and open the printer cover by pulling back
on the cover once unlatched.
Cover open lever
Use this lever to open
the printer cover.
Control panel
Features lamps that
indicate printer status
and a button for
operating the printer.
Advertisement
Related Manuals for Star Micronics TSP654II
Summary of Contents for Star Micronics TSP654II
- Page 1 Setting up the Star Micronics Printer Cover open lever Use this lever to open Printer cover the printer cover. Open to replace paper. Do not open while printing. Control panel Power switch Features lamps that Turns the printer indicate printer status on and off.
- Page 2 If the printer has no roll inside, load a new roll and make sure the orientation of the paper is correct according to the diagram below. Make sure to also pull a flap of paper out to ensure that the paper has been loaded correctly.
- Page 3 Pairing the printer via Bluetooth Ensure that Bluetooth has been enabled on the iPad by going to Settings and making sure that Bluetooth is ON. Turn on the printer by toggling the power switch. In order to pair the printer with the iPad, you’ll need to reach behind the printer to access the PAIR button.
- Page 4 Printing orders To enable receipt printing, simply go to the Settings section of your UberEATS dashboard and toggle on the Enabled option. Within the dashboard, you will be able to print an order by tapping on the print icon for an individual order.