Honeywell MasterLogic 50 Series Installation Manual

MasterLogic-50 Series
Analog Output Module
MLF-DV04A
MLF-DC04A
Installation Manual
10-23-43-07-EN
May 2014
10310000839 Printed in Korea
For more information on MasterLogic PLCs , contact your nearest Honeywell office
Australia Japan Philippines
Honeywell Ltd. Honeywell Inc. Honeywell Systems (Philippines) Inc.
Phone : (61) 2-9353-7000 Phone: (81) 3-6730-7149 Phone: (63) 2-633-2830/31
Fax : (61) 7-3840-6488 Fax: (81) 3-6730-7228 Fax: (63) 2-638-4013
Indonesia South Korea Singapore
PT Honeywell Indonesia Honeywell Co., Ltd. Honeywell Pte Ltd.
Phone: (62) 21-535-8833 Phone : (82) 2-799-6114 Phone: (65) 6355-2828
Fax: (62) 21-536-71008 Fax : (82) 2-792-9015 Fax: (65) 6445-3033
India Malaysia Thailand
Honeywell Automation India Limited. Honeywell Engineering Sdn Bhd. Honeywell System (Thailand) Ltd.
Phone: (91) 20-6603-9400
Phone: (603) 7958-4988 Phone: (662) 693-3099
Fax : (91) 20-6603-9800 Fax: (603) 7958-8922 Fax: (662) 693-3085
Taiwan New Zealand For Countries (SE Asia) Listed
Honeywell Taiwan Ltd. Honeywell Ltd. below, call Honeywell Singapore
Phone : (886) 2-2245-1000 Phone: (64) 9-623-5050 Office
Fax : (62) 2-2245-3243 Fax: (64) 9-623-5060 Pakistan, Cambodia, Laos, Myanmar,
Vietnam and East Timor
For Countries Listed below,
call Honeywell India Office
Bangladesh, Nepal, and Sri Lanka
Honeywell offers a complete portfolio of products and solutions for process and machine control applications,
including controllers, recorders, transmitters, actuators, smart sensors, and analytical instruments. To learn more
about these offerings and how they can help your organization achieve breakthrough results, contact your local
Honeywell representative, or contact us at the following phone numbers:
U.S.A.: 1-800-784-3011 France: 33 1 60 19 80 75
Canada: 1-800-461-0013 Italy: 39 02 9214 6503
UK: 44 1344 655251 Spain: 34 91313.61.00
Germany: 49 69 8064-336 Asia/Pacific: 65 6355 2828
Latin America: 1-305-805-8188
Honeywell Process Solutions
HPS-FP Asia Pacific
Honeywell Building
17 Changin Business Park Central 1
Singapore 486073
www.honeywell.com/ps
10310000839 Printed in Korea
Safety Precautions
► Safety Precautions is for using the product safe and correct in order to prevent the
accidents and danger, so always follow the instructions.
► The precautions explained here only apply to the MLF-DV04A/DC04A(Analog output
module). For safety precautions on the PLC system, refer to the MasterLogic-50 CPU
User‟s manual.
► The precautions are divided into 2 sections, „Warning‟ and „Caution‟. Each of the meanings
is represented as follows.
If violated instructions, it can cause death, fatal injury or
Warning
considerable loss of property.
If violated instructions, it can cause a slight injury or slight loss
Caution
of products.
► The symbols which are indicated in the PLC and User‟s Manual mean as follows
This symbol means paying attention because of danger of injury, fire, or malfunction.
This symbol means paying attention because of danger of electrical shock.
► Store this datasheet in a safe place so that you can take it out and read it whenever
necessary. Always forward it to the end user.
► Store this datasheet in a safe place so that you can take it out and read it
whenever necessary. Always forward it to the end user.
Warning
Do not contact the terminals while the power is applied.

Risk of electric shock and malfunction.
 Protect the product from being gone into by foreign metallic matter.
Risk of fire, electric shock and malfunction.
 Do not charge, heat, short, solder and break up the battery.
Risk of injury and fire by explosion and ignition.
Caution
 Be sure to check the rated voltage and terminal arrangement for the
module before wiring work.
Risk of electric shock, fire and malfunction.
 Tighten the screw of terminal block with the specified torque range.
If the terminal screw looses, it can cause fire and electric shock.
 Use the PLC in an environment that meets the general specifications
contained in this datasheet.
Risk of electrical shock, fire, erroneous operation and deterioration of the PLC.
Be sure that external load do not exceed the rating of output module.

Risk of fire and erroneous operation.
 Do not use the PLC in the environment of direct vibration.
Risk of electrical shock, fire and erroneous operation.
 Do not disassemble, repair or modify the PLC.
Risk of electrical shock, fire and erroneous operation .
 When disposing of PLC and battery, treat it as industrial waste.
Risk of poisonous pollution or explosion.
Precautions for use
► Do not Install other places except PLC controlled place.
► Make sure that the FG terminal is grounded with class 3 grounding which is dedicated to
the PLC. Otherwise, it can cause disorder or malfunction of PLC
PLC Others PLC Others PLC Others
< Best > < Good > < Bad >
► Connect expansion connector correctly when expansion module are needed.
► Do not detach PCB from the case of the module and do not modify the module.
► Turn off power when attaching or detaching module.
► Cellular phone or walkie-talkie should be farther than 30cm from the PLC.
► Input signal and communication line should be farther than minimum 100mm from a high-
tension line and a power line in order not to be affected by noise and magnetic field.
►
Before handling the product
Before using the product, read the datasheet and the User‟s manual through to the end
carefully in order to use the product efficiently.
MasterLogic-50 Series User's Manual
Name Code
MasterLogic-50 User‟s manual(Programming software) 10310000512
MasterLogic-50 Basic Instruction & Programming User‟s manual
10310000510
1. Introduction
Analog output module designed for series is used to convert the digital
MasterLogic-50
value of signed 12 bit binary data to analog signal.
2. General Specifications
No Item Specifications
1 Operating temp. 0℃∼+55℃
2 Storage temp. -25℃∼+70℃
Operating
3 5∼95%RH (Non-condensing)
humidity
4 Storage humidity 5∼95%RH (Non-condensing)
For discontinuous vibration
Frequency Acceleration Amplitude Number
10≤f< 57 ㎐
- 0.075mm
57≤f≤150 ㎐ 2
9.8m/s (1G) -
Each 10
5 Vibration
For continuous vibration times in
Frequency Acceleration Amplitude X,Y,Z
10≤f< 57 ㎐ directions
- 0.035mm
2
57≤f≤150 ㎐
4.9m/s (0.5G) -
* Max. impact acceleration:147 ㎨(15G)
* Authorized time :11 ㎳
6 Shocks
* Pulse wave : Sign half-wave pulse
(Each 3 times in X,Y,Z directions)
Square wave impulse noise ±1,500V
Voltage : 4kV
Electrostatic discharging
(contact discharging)
Radiated electromagnetic field
27 ~ 500MHz, 10 V/m
7 Noise noise
Fast Digital/Analog I/O
Power
Class communication
Transient
module
/burst interface
noise Voltage 2kV 1 kV
Ambient
8 No corrosive gas or dust
conditions
9 Operating height 2000m or less
10 Pollution degree 2 or less
11 Cooling method Self-cooling
3. Performance Specifications
Specifications
Item
XBF-DV04A
Type Voltage
Analog
DC 0 ~ 10V
output
Range
(Load resistance: 2kΩ or more)
Type Signed 12 bit binary data
Unsigned value 0 ~ 4000
Digital
Singed Value -2000 ~ 2000
input
Precise Value 0 ~ 1000
Percentile Value 0 ~ 1000
2.5 ㎷(1/4000)
Max. resolution
Accuracy
Max. conversion speed
Absolute max. output DC ±15V
Output channel
Photo-coupler insulation between output terminal and
Insulation method
PLC power (no insulation between channels)
Terminal connected 11 Point terminal
I/O occupied points Fixed point assignment: 64 Point
110 ㎃
Consumed Internal(DC 5V)
70 ㎃
current External(DC24V)
Weight 64g
Standard
Remark
▶ Format of input data can be set through applicable program or parameters for respective
channels
▶ When Analog output module is released from the factory, Offset/Gain value is as
adjusted for respective analog output ranges, which is unavailable for user to change.
4. Parts Names and Descriptions
MLF-DV04A XBF-DV04A
①
RUN
IEC61131-2
IEC61131-2
CH0
②
CH1
CH2
IEC61131-2
CH3
IEC61000-4-2
IEC61131-2,
③
IEC61000-4-3
IEC61131-2
IEC61000-4-4
No. Description
RUN LED
Displays the operation status
①
On: Operation normal
Blink: Error occurs
Off: DC 5V disconnected, Module error
Analog output(voltage, current) terminal
②
Analog output(voltage, current) terminal, whose respective channels can be
connected with external devices
External power input terminal
③
External power input terminal supplied DC 24V for analog output(voltage, current)
XBF-DC04A
Current
DC 4 ~ 20 ㎃
DC 0 ~ 20 ㎃
(Load resistance: 510Ω or less)
0 ~ 4000
-2000 ~ 2000
400 ~ 2000/0 ~ 2000
0 ~ 1000
5 ㎂(1/4000)
±0.5% or less
1 ㎳/Channel
DC +25 ㎃
4 Channel
110 ㎃
120 ㎃
70g
MLF-DC04A XBF-DC04A
RUN
CH0
CH1
CH2
CH3