Detaching The Arm/Stand(For Vesa Wall Mount) - Asus VE278Q Series User Manual

2.1 Detaching the arm/stand
(for VESA wall mount)
The detachable stand of the VE278Q/VK278Q Series LED monitor is specially
designed for VESA wall mount.
To detach the arm/stand:
1. Disconnect power and signal cables. Carefully put the front of the monitor
face down on a clean table.
2. Use a screwdriver to remove the two screws that secure the stand to the
monitor.
3. Detach the stand from the monitor.
•
•
•
•
2-1
W e recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
H old the stand of the monitor while removing the screws.
The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
Use only the UL Listed Wall Mount Bracket with minimum weight/load 22.8
Kg (Screw size: 4 x 12 mm).
Chapter 2: Setup