Trouble Shooting - Dishwasher - Asko DW 1705 User Manual

TROUBLE SHOOTING - DISHWASHER

If the machine does not work, check first to find out if the reason is a simple fault that you can
remedy yourself. Try to locate the fault with the aid of the following description.
FAULT - DISHWASHER WILL NOT START
Possible causes
1. Main switch is OFF.
2. Door not properly closed.
3. Fuse has blown.
4. Power supply plug not plugged in.
5. Water tap not opened.
FAULT - WATER REMAINS IN THE MACHINE
The drain pump will start automatically if the machine takes in too much water. If water is not
pumped out, the fault may be due to one of the following reasons:
Possible causes
1. Drain hose is clogged. Make certain that there is nothing blocking the connection of the drain hose
to the sink drain trap. Waste can fasten at the end of the connecting pipe. Check also that the tapered
connecting pipe is cut so that the inside diameter is as large as possible, but at least 16 mm.
2. Kink in the drain hose. Check the hose to eliminate any kinks or sharp bends.
3. Filters are clogged. Clean the tubular strainer, coarse filter and fine filter.
4. Drain pump is clogged. Clean the pump.
5. Ensure that the black adapting piece is correctly fitted on the left in the bottom drain by
the drain pump.
2 2