Art SGX-2000 User Manual page 75

Regeneration Feed ([RGN-FD]) controls where the digital delay's (if used) regeneration
comes from. The insert point is either before (PRE) or after (POST) the first voice. When
the Stereo Digital Delay is used with the Dual Pitch Transposer and the RGN-FD is set to
POST, the glissando effect of the normal Pitch Transposer is the result. Use the PRE
setting, for a simple pre delay before the pitch shift occurs. Only the Short Stereo Delay is
available for use with the Dual Pitch Transposer.
The Position ([POSTN1 and 2]) parameter lets you set where in the sound field each
individual pitch is heard. The default setting is center field. When the value is 0, the
signal appears full right. A value of 63 is full left.
SPACE PHASER
[PHASER], [PSR]
Parameters:
TYPE= [POST] OFF, POST, PRE
WIDTH= [65%] 0 to 100% in % increments
SPEED= [0.84Hz] 0.04Hz to 27.3Hz
REGEN= [50%] 0 to 100% in % increments
DEPTH= [100%] 0 to 100% in % increments
The Phaser algorithm recreates classic phaser sounds from the past. A three notch
design is used to develop stunning effects, killer sounds, and of course, pure sonic
destruction!
The sweep WIDTH and SPEED is user controlled. REGENeration may be adjusted to
vary the "strength" of the processed signal. The DEPTH parameter controls the intensity
of the effect in the preset. When the TYPE= POST the phaser is positioned last in the
chain. This is to assure that maximum effect and presence is maintained in all effects
combinations. Using TYPE= PRE positions the Phaser in parallel with any Reverb or
DDL effect. By positioning the Phaser like this, the processed signal is not delayed or
reverberated and then phased.
DIGITAL TUNER
[TUNER], [TNR]
Parameters:
TYPE = [GUITAR] BASS, GUITAR, BASS12F, GTR12F
REFRNC (guitar) = [OFF] OFF, E 82, A 110, D 147, G 196, B 247, E 330, A 440,
AUTO (gtr12f) = [OFF] OFF, E 164, A 220, D 284, G 392, B 494, E 659, A 440, AUTO
(bass) = [OFF] OFF, B 31, E 41, A 55, D 73, G 98, C 131, A440, AUTO
(bass12f) = [OFF] OFF, B 62, E 82, A 110, D 146, G 196, C262, A 440, AUTO
DETUNE = [0.00] (-)2.00 to (+)2.00 in 0.04 (four cent) intervals
LEVEL = [0%] 0 to 100% in 2% increments
9