Preset 1-110 Locked/Unlocked; Midi; Midi Enable - Art SGX-2000 User Manual

-Press the RECALL button.
*Even though the title is not displayed in the LCD , the factory preset is now
active, but, IT IS NOT PERMANENT. If you wish to make the preset permanent, you
must STORE it. To store the preset in the first 110 locations, you must first
unlock the existing preset. (See the next paragraph about unlocking a preset) If
you are copying to a location above 110, press the STORE button now.
-Press STORE, the preset is now stored into the location you selected.

Preset 1-110 Locked/Unlocked

Protects the first 110 presets from being overwritten.
The factory presets may be unlocked for editing. When you set the value for
Unlocked, all factory presets are unlocked and ready to edit. To relock the
presets, select the Locked value when you are done editing. At first you may not
want to overwrite the factory presets, so increment up to a user preset and store
the new preset.
UNLOCKING THE FACTORY PRESETS
-Make sure you are in the EDIT Mode. (Press EDIT button if not)
-Press the UTILITY button.
-Press the Param button.
-Use the Encoder to select the screen displaying [PRESET1...110 = LOCKED].
-Press the Value button and use the Encoder to change the value to UNLOCKED.
*All presets are now unlocked. If you wish to store new information in the
Factory Presets, press the STORE button.
NOTE: Remember, when you unlock a preset, ALL presets are unlocked. To prevent
overwriting presets, re-lock the presets following the directions to unlock a
preset, only selecting the "LOCKED" value.

MIDI

You may gain access to all MIDI parameters and their values by pressing this
button. Shown here are the variable MIDI parameters and their default value
settings.
Once you are in MIDI Mode you may change values by first selecting the parameter
and then changing the value. To do this first press the PARAM button and select
the parameter you wish to change with the Encoder. Next press the VALUE button
and use the Encoder to select a new value. You do not need to press the STORE
button to save the changes with one exception, it is done automatically. You need
to press the Store button if you edit the On/Off status of an effect and want to
make it permanent. To exit MIDI Mode, press the MIDI button to return to Edit
Mode or the Edit button.
PROGRAMMING HINT: Press the Value button to change and view the parameters then
use the Encoder to set the value. This way you don't have to switch between the
Param and Value buttons to edit values.

MIDI Enable

PM= ON, OFF [ON]
PROG= ON, OFF [ON]
17