Page 1
DigiMux DG4000 Series This document contains supplemental information that is not provided in the DigiClient User’s Manual. Please read this Addendum for the most recent information. The information in this document applies to this DigiMux DG4000 series: Release: Hardware Version: OSD Software Version: DigiClient Version: DigiAlert Version:...
ADTT16E Touch Tracker Use with DigiMux DigiMux supports the use of the ADTT16E Touch Tracker as an American Dynamics dome control device. You can use the Touch Tracker to control domes directly through Sensornet, or control domes from the DigiMux front panel or remote DigiClient software.
Installation Dome Touch Tracker RS232-USB Converter • The RS232-USB converter connects the RS232 DB9 port on the Touch Tracker’s EIM and the USB port on the DigiMux unit. • Domes connect directly to the Touch Tracker’s EIM using Sensornet. Setup and Configuration •...
Installation +12Vdc Keyboard RS485-RS232 Converter RS232-USB Converter • The RS485 data lines from the keyboard’s KMI terminals would go through the RS485-RS232 converter, the RS232-USB converter, and then the USB port of DigiMux. Note that the RS485-RS232 requires 12VDC. • Domes are connected directly to RS485 terminals on the DigiMux external I/O board, using RS485.
Page 5
3. Press ESCAPE to exit. 4. Select Monitor #1 on the keyboard to return to the Main monitor control mode. Integrated Digital Signature Verification: DigiVerify When you export video from a DigiMux with Digital Signature, the exported file package includes a public key file (.GPG), an encrypted audio video file (.AVI), and a signature file (.SIG) for later authentication.