Setting The Aux+ Setup Mode; Setting The Aux Name Mode; Usb Memory (Optional); Controlling Usb Memory (Optional) - Alpine CDE-102 Owner's Manual

POW ON : The speakers are driven by the built-in
amplifier.
SPEAKER
RIGHT FRONT
SPEAKER
RIGHT REAR
SPEAKER
LEFT REAR
SPEAKER
LEFT FRONT
• No sound is produced by the system when the power output is set to
OFF.

Setting the AUX+ SETUP Mode

AUX+ ON / AUX+ OFF (Initial setting)
An external device (such as a portable music player) can be connected
to the Full Speed connector of this unit. A conversion cable
(KCA-237B) for building up the AUX IN (optional) is required.
A portable music device and an iPhone/iPod cannot be connected to the
Full Speed connector at the same time.
AUX+ ON: Set to ON when a portable device is connected. If
SOURCE/
sound of the portable device is input to the unit.
AUX+ OFF: Set to OFF when an iPhone/iPod is connected.
You can change the AUX+ name display when AUX+ SETUP is set to
/ /ENT when AUX+ SETUP is set to ON, and select
ON. Press
AUX+ NAME by turning the Rotary encoder, then press
After that, turn the Rotary encoder to select the desired AUX+ name.

Setting the AUX NAME mode

1
AUXILIARY* (Initial setting) / TV / DVD / PORTABLE*
You can change the AUX NAME display in the SETUP mode.
1
* After the setting is completed, AUX is displayed on the unit.
2
* After the setting is completed, PMD is displayed on the unit.
Speakers
Front
right
Rear
right
Rear
left
Front
left
is pressed and AUX+ is selected, the
/ /ENT.
2
/ GAME

USB memory (Optional)

/ /ENT
SOURCE/

Controlling USB memory (Optional)

A USB memory device may be connected to this unit. With USB
memory connected, playback of files on the device is controlled from
this unit.
• The controls on this unit for USB memory operation are operative
only when a USB memory is connected.
Playing MP3/WMA/AAC Files with the
USB memory (Optional)
If you connect a USB memory containing MP3/WMA/AAC, you can
play these files on this unit.
1
Press SOURCE/ to switch to the USB AUDIO
mode.
The mode will change every time the button is pressed.
TUNER DISC USB AUDIO
3 4
BT AUDIO* AUX*
1
* Displayed only when the iPhone/iPod is connected and AUX+
SETUP is set to OFF, refer to "Setting the AUX+ SETUP Mode"
(page 17).
2
* Displayed only when the AUX+ SETUP is set to ON, refer to "Setting
the AUX+ SETUP Mode" (page 17).
3
* Only when BT IN is set to ADAPTER, refer to "Setting the Bluetooth
Connection (BT IN)" (page 16).
4
* Refer to "Using the Front AUX Input Terminal" (page 15).
2
To pause playback, press
Pressing / /ENT again will resume the playback.
• The root folder is displayed as "ROOT" in the Folder Name Search
mode.
• When a search is made in the USB mode, any song being played back
will be stopped.
• This unit plays back files on a USB memory device with the same
controls and modes as playback of CDs containing MP3/WMA/AAC.
For details, refer to "CD/MP3/WMA/AAC" on pages 8 to 11.
• Before disconnecting USB memory, be sure to change to another
source or set to pause.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
1 2
iPod* / AUX+*
TUNER
/ /ENT.
17
-EN