Alphasmart AS 3000 User Manual page 21

clipboard (and you see the screen pictured here), go on to
step 3.
Ready to receive a file.
3. Select which file you want to receive the data by using the arrow
keys to scroll and select the file and pressing
one of the
Select where you want to store the file:
- File 1 (empty)
- File 2 (1437 characters)
File 3 (empty)
Note:
each AlphaSmart device.
4. Do one of the following:
If the file you selected is empty, do nothing. Beamer places
•
the beamed file into the empty file.
If the file isn't empty, choose to overwrite the existing file or
•
to append the new file to it.
File x is not empty. Choose one:
- Overwrite the file?
- Append to the file?
The beamed data should now be in the file you specified on the
receiving device. To view it, press
Beaming and Receiving with Beamer
Beaming from a Palm OS device to an AlphaSmart device
keys along the top of the device.
file #
The status that appears after each file varies depending on
(Press esc key to cancel)
(Press esc key to exit)
and select AlphaWord, then
applets
, or by pressing
enter
17