Download Print this page
Milwaukee EC59 User Manual

Milwaukee EC59 User Manual

Pro waterproof ec/tds/temperature testers

Advertisement

Quick Links

It is recommended to replace the batteries
immediately.
To replace the batteries unscrew the battery
compartment cap and replace all four 1.5  V
batteries while paying attention to their
polarity. Make sure the gasket is in place
before screwing back the cap.
Batteries should only be replaced in a non-
hazardous area using the battery type
specified in this instruction manual.
ACCESSORIES
MI59P
Replaceable probe for EC59 & EC60
12.88 mS/cm calibration solution,
M10030B
20 ml sachet, 25 pcs.
1413 µS/cm calibration solution,
M10031B
20 ml sachet, 25 pcs.
12.88 mS/cm calibration solution,
MA9060
230 ml bottle
1413 µS/cm calibration solution,
MA9061
230 ml bottle
MA9016
Cleaning solution, 230 ml
M10000B Rinse solution, 20 ml sachet, 25 pcs.
SPECIFICATIONS
Range
0 to 3999 µS/cm / 0 to 2000 ppm (EC59)
0.00 to 20.00 mS/cm / 0.00 to 10.00 ppt (EC60)
0.0 to 60.0 °C / 32.0 to 140.0 °F
Resolution
1 µS/cm / 1 ppm (EC59)
0.01 mS/cm / 0.01 ppt (EC60)
0.1 °C / 0.1 °F
Accuracy (@25 °C / 77 °F)
±2 % FS (EC/TDS) / ±0.5 °C / ±1 °F
Temperature Compensation
Automatic, with ß=0.0 to 2.4 %/°C
Calibration
Automatic, 1 point
Probe
Replaceable MI59P
Environment
0 to 50 °C; 100 % RH max.
Battery Type
4 x 1.5 V; IEC LR44, A76
Battery Life
Approx. 100 hours of use
Auto-off
After 8 min. of non-use
Dimensions / Weight 200 x dia 38 mm / 100 g
CERTIFICATION
Milwaukee Instruments conform to
the CE European Directives.
Disposal of Electrical & Electronic
Equipment. Do not treat this product
as household waste. Hand it over
to the appropriate collection point
for the recycling of electrical and
electronic equipment.
Disposal of waste batteries. This product
contains batteries. Do not dispose of them with
other household waste. Hand them over to the
appropriate collection point for recycling.
Please note: proper product and battery disposal
prevents
potential
negative
for human health and the environment. For
detailed
information,
contact
household waste disposal service or go to
www.milwaukeeinstruments.com (USA & CAN)
or www.milwaukeeinst.com.
RECOMMENDATION
Before using this product, make sure it is entirely
suitable for your specific application and for the
environment in which it is used. Any modification
introduced by the user to the supplied equipment
may compromise the meter's performance. For
your and the meter's safety do not use or store
the meter in hazardous environment. To avoid
damage or burn, do not perform any measurement
in microwave ovens.
WARRANTY
These instruments are warranted against defects
in materials and manufacturing for a period
of 2 years from the date of purchase. Probe is
warranted for 6 months. This warranty is limited
to repair or free of charge replacement if the
instrument cannot be repaired. Damage due to
accidents, misuse, tampering or lack of prescribed
maintenance is not covered by warranty. If
service is required, contact your local Milwaukee
Instruments Technical Service. If the repair is not
covered by the warranty, you will be notified of
the charges incurred. When shipping any meter,
make sure it is properly packaged for complete
protection.
ISTEC59_07_20-1
USER MANUAL
RoHS
COMPLIANT
EC59 & EC60
PRO Waterproof
EC / TDS / Temperature
consequences
your
local
milwaukeeinstruments.com (USA & CAN)
SATISFACTION
GUARANTEED
Testers
milwaukeeinst.com

Advertisement

loading

Summary of Contents for Milwaukee EC59

  • Page 1 To avoid Range damage or burn, do not perform any measurement 0 to 3999 µS/cm / 0 to 2000 ppm (EC59) in microwave ovens. 0.00 to 20.00 mS/cm / 0.00 to 10.00 ppt (EC60) 0.0 to 60.0 °C / 32.0 to 140.0 °F...
  • Page 2 Immerse the probe in the proper calibration solution: M10030 (12.88 mS/cm) for EC60 Notes: and M10031 (1413 µS/cm) for EC59. Before taking any measurement, make sure y Once the calibration has been automatically the meter is calibrated (the CAL tag is on).

This manual is also suitable for:

Ec60