Alcatel-Lucent OmniSwitch 6850-48 Hardware User's Manual page 36

OmniSwitch 6850-P24L
Refer to the illustration below for more front panel information. For detailed LED descriptions, refer to
page 2-54. For information on the chassis rear panel, refer to
USB Port
High speed USB 2.0 port, which
can be used for quick upgrades.
OK PRI PWR BPS
OmniSwitch 6850-P24L 1 2
USB
Console
Console Port
The OS6850-P24L front panel
provides one RJ-45 port for con-
sole connections. Console con-
nections are used by network
administrators for switch man-
agement. This female RJ-45 con-
nector provides a DTE console
connection.
page 2-12
Status and Slot Indicator LEDs
For information on the OS6850-P24L's
status and slot indicator LEDs, refer to
page 2-54.
3 4 5 6 7 8 9 10 11 12 13 14 15 16
10/100 Mbps and 10/100/1000Mbps PoE
The OS6850-P24L provides 20 fixed
10/100BaseT non-combo PoE (1–20) and 4
fixed
10/100/1000BaseT combo PoE (21–24).
These are auto-sensing and auto-MDIX
and use RJ-45 connectors.
OmniSwitch 6850-P24L Front Panel
OmniSwitch 6850 Series Hardware Users Guide
OmniSwitch 6850 Series Chassis and Hardware Components
page 2-56.
17 18 19 20 21 22 23 24
21 22 23 24
CLASS 1 LASER PRODUCT
Combo SFP
The OS6850-P24L provides four combo
SFP connectors for 1000Base-X high-
speed connections.
By default, when an SFP is installed in a
combo port, it takes over the port number
of the corresponding RJ-45 Ethernet port.
In other words, if an SFP is installed in
the slot labeled 24, Ethernet port 24
would no longer be available and cannot
be used for 10/100/1000 traffic. This
default setting is referred to as "preferred
fiber." Refer to "Configuring Ethernet" in
the Network Configuration Guide for
detailed information, including steps for
configuring combo port settings.
September 2009