Fluke QuickClean-1.25-5P Instruction Sheet

The Quick Clean cleaners let you quickly clean the endfaces of these types of fiber optic
connectors:

Quick Clean 1.25 mm: Cleans 1.25 mm LC and MU connectors

Quick Clean 2.5 mm: Cleans 2.5 mm SC, ST, FC, and E200 connectors

Quick Clean MPO 12/24 or 16/32: Cleans 12/24 or 16/32 MPO and MTP
To See Other Languages
This instruction sheet is available in other languages on the Fluke Networks website.
WSafety Information
To prevent possible damage to your eyes caused by hazardous
radiation:

Do not look directly into optical connectors. Some optical equipment
emits invisible radiation that can cause permanent damage to your
eyes.

Before you clean an endface, turn off any optical sources (laser or
LED) that are connected to the fiber.
To prevent damage to the cleaner and to fiber optic connectors:

Use the cleaner to clean only the correct type of connector. If you
use the cleaner on the incorrect type of connector, you can cause
damage to the cleaner and the connector.

Keep the guide cap on the cleaner with the cover closed when you
do not use the cleaner. Keep the guide cap clean.

Do not touch the tip of the cleaner. Do not pull the cloth away from
the tip of the cleaner.
*4858825*
PN 4858825 December 2016, Rev. 1 2/2019
2016, 2019 Fluke Corporation
All product names are trademarks of their respective companies.
Fiber Endface Cleaners
W *
Warning
W
Caution
Quick Clean
Instruction Sheet
®
™
connectors