Aiphone NE-NVP-RA Instructions

Vandal Proof Sub Station for NEM System
The NE-NVP-RA sub station is vandal proof, and can be used with the NEM or the NEM-RS systems. Designed for
Rescue Assistance applications and ADA compliance, this unit features Emergency and Braille signage, a large red
call button, and "Call Placed" and "Help Coming" LED indicators. Remote indicators can be added for better
visibility of a station's status. A standard NEM master requires a manual reset button at each location, or the master
station can be equipped with a reset button (NEM-nRS version). The NE-NVP-RA is designed to be surfaced
mounted, requiring the SBX-NVP surface mount box. Tamper proof screws are provided, along with a wrench for
installation.
WIRING DIAGRAM FOR SYSTEM WITH CALL RESET AT THE MASTER
NEM-nRS Master Station Required
PS-2410A
or PS-24E
+
-
WIRING DIAGRAM FOR SYSTEM WITH OVERHEAD LAMPS AND A RESET BUTTON.
Standard NEM master used.
PS-2410A
or PS-24E
+
-
NE-NVP-RA
Requires surface mount box
SBX-NVP
- INSTRUCTIONS -
NEM-nRS Master
1
2
3
Use a designated
~
wire from each no.
terminal to sub
20
station's RED wire.
E
S
H
+
-
NEM-n Master
1
2
3
Use a designated
~
wire from each no.
20 terminal to sub
station's RED wire.
E
S
H
+
-
NE-NVP-RA
NE-NVP-RA
Red
Green
Green
jumper jumper
(Do not cut) (Do not cut)
Blue
Purple
Purple
Black
Black
Yellow
Yellow
Orange
Orange
NE-NVP-RA
Red
Green
jumper
(Cut)
Blue
Purple
Black
Yellow
Orange
Blue
Blue
NAR-2A*
Special
Order
Products
A D A
Americans with
Disabilities Act
Red
Blue
Blue
NBY-4A
"Call Activation" light
Blue
Blue
NBY-4A
"Help Coming" light
Blue
* Reset Button:
(Any normally closed button or
keyswitch. Not required when
using the NEM-RS master.)
Pg. 1