Aiphone MKS-2MCD Specifications

MKS-2MCD
Video Sentry PanTilt Plus
DESCRIPTION:
The MKS-2MCD is a video door answering system complete
with a PanTilt door station (MK-DAC), an inside monitoring
station (MK-2MCD) and power supply (PS-1820UL). The
system has the capacity for an additional door station,
either audio video or audio only and up to two additional
interior stations, either audio video or audio only.
Video door stations are available in surface, flush and vandal
resistant versions and all feature: CCD chip camera with
infrared LEDs for low light applications, PanTilt mechanism
adjustable by an interior monitor, call-in button, speaker/
mic for communication, and a locator LED. The interior
monitor stations are equipped with a 4" flat CRT monitor, a
monitor activation button, a pan and tilt control pad, door
release button, secondary dry contact (optional), an all
call button, call-in indicator LED, and a handset for private
MK Series PanTilt System Components
MK-2MCD/HD Features:
Audio/Video Monitor
Max 2 Doors and 3 interior stations
4" CRT Screen
Handset for private communication
All call to other units
Door release contact
Extra dry contact (Optional)
Call-in LED
Chime tone Volume control
Transfer of door call-in
Instant-on when door calls
Monitor the door station
PanTilt control pad
MK-DAC Features:
Surface mount
PanTilt camera
Built in infrared LED's
Lexan protected camera lens
FEATURES & FUNCTIONS:
Video quality improved over current MY system
Set contains door station, monitor and power supply
Extra dry contact (requires additional equipment)
Door call-in LED
Video and audio turn on when door calls in
Door Call Transfer
Redesigned monitors
Two additional monitor or handset only stations can be added
Simple 2-wire hook up -- Can replace existing doorbell
4 or 6 wires between inside monitors (based on distance)
Aiphone Communication Systems • 1700 130th Ave. NE • Bellevue, WA 98005
(425) 455-0510 • FAX: (425) 455-0071 • (800) 692-0200 • www.aiphone.com
communication. Brightness and chime volume controls
are located under each monitor unit.
The call-in button on the door station turns on the 4"
CRT at the inside monitor, initiates audio monitoring
from the door and activates a two or four-stroke chime.
Audio communication at the door station is hands free,
and communication at the inside station is through the
handset. The entry area can be monitored by pressing
the "monitor" button on any room station. This allows
both audio and video monitoring, staying on for
approximately 45 seconds. The interior stations also
feature a normally open dry contact for door release
and an extra dry contact for light or secondary door
release activation. To selectively release two doors, add
the RY-3DL adaptor.
MK-2SD Features:
Audio Only sub
Handset for private communication
All call to other units
Door release contact
Extra dry contact (Optional)
Call-in LED
Chime tone Volume control
Transfer of door call-in
MK-DBC Features:
Flush mount
PanTilt camera
Built in infrared LED's
Lexan protected camera lens
Handset for two-way communication at inside station
Hands free communication at the door station
Infrared, CCD camera for low light applications
Built-in video output (requires additional equipment)
All call between inside stations
One power supply for entire system
PanTilt controlled from inside monitor stations
Call button rings a different chime for each door
Activate door strike from inside station(s)
Selectively release door locations (adaptor required)

SPECIFICATIONS

MK-DGC Features:
Flush mount
Backlit directory
Vandal resistant
Aluminum face
Built in infrared LED's
Lexan protected camera lens