Timer Recording - Toshiba DVR670KU Owner's Manual

You can program the unit to record up to 12 programs
within a month in advance. Daily or weekly program
recordings are also available.
Before recording, make sure
• Set the clock before setting a timer programming.
• Insert a recordable disc with enough recordable space or
a cassette tape with an erase-protection tab.
.@/: .@/:
GHI GHI
PQRS PQRS
DTV/TV
DISC MENU
CLEAR
REV
SKIP SKIP
PAUSE
DUBBING
REPEAT TIMER SET TIMER SET
Note
• If you have not set the clock yet:
"Manual Clock Setting" menu will appear instead of
the timer programming list at step 1. Continue with
the step 4 in "Manual Clock Setting" on page 32 before
setting a timer programming.
• Use [s / B] to move the cursor to the left and the
right in "Timer Programming" menu.
• If a basic recording or one-touch timer recording is in
progress on one component (e.g., VCR) and the timer
recording set for the other component (e.g., DVD) is about
to begin, the unit automatically switches to the
programmed channel for timer recording 2 minutes before
the programmed starting time, and the recording in
progress (for VCR) will be canceled UNLESS their recording
channels are the same. If their recording channels are the
same, the timer recording will start without canceling the
recording currently in progress. In this case, the recording
of the same channel will be made on both DVD and VCR.
• You cannot make a program whose recording time
exceeds 12 hours.
• Cancel the timer-standby mode by pressing [TIMER
SET] before operation for either DVD or VCR. When
finished operating, press [TIMER SET] to resume the
timer-standby mode.
• In the timer-standby mode, you can turn on the
power and use the component (VCR or DVD) which is
not currently timer-programmed.
50 EN
E9SK0UD_DVR670KU_EN_v1.1.indd 50 E9SK0UD_DVR670KU_EN_v1.1.indd 50

TIMER RECORDING

ABC ABC DEF DEF
CH
JKL JKL MNO MNO
TUV TUV WXYZ WXYZ
TIMER TIMER
SPACE SPACE
PROG. PROG.
SETUP SETUP DISPLAY AUDIO
TOP MENU
ENTER ENTER
RETURN
INSTANT 1.3x/0.8x
TIME SLIP
SKIP PLAY
PLAY FWD
STOP SKIP SKIP
VCR DVD
REC MODE REC
SEARCH ZOOM
Guide to Timer Programming Display
3 1
Timer Programming
JAN/ 2/09 1:00 AM 125-01 SP
SP (1:00) THU JAN/01 10:00AM
Date Start
JAN/02 1:00AM 2:00AM DTV 125- 1
New Program
4
1. Title of a Timer Program (Contains date, time, channel,
recording mode of the program)
2. Current date and time
3. Recording mode and length of the recording
4. Timer program list
5. Total number of pages and current page (2 pages maximum)
1
Press [TIMER PROG.].
2 Use [K / L] to select "New Program",
then press [ENTER].
Timer Programming
THU JAN/01 10:00AM
Date Start End
New Program
• If there are 6 or more programs, use
[SKIP j / i] to change pages.
3 Use [K / L] to enter the date, then
press [B].
Date Start
JAN/02 - - : - -
CH REC To
DTV125- 1 DVD
JAN/01
Daily
MON-SAT
MON-FRI
SAT
FRI
SUN
JAN/31
2
End CH
1/1
5
CH
1/1
End
- - : - -
Mode
SP
SP 2 : 00
When pressing [L] at
the current date, the
date will change as
follows.
e.g.) January 1st
2009/04/03 15:38:01 2009/04/03 15:38:01