Video - Toshiba DVR670KU Owner's Manual

Video

OPEN/
CLOSE
.@/:
GHI
PQRS
DTV/TV
DISC MENU
CLEAR
REV
SKIP
PAUSE
DUBBING
REPEAT
Press [STOP C] if you are playing back a disc.
1 Press [SETUP] and use [K / L] to
select "General Setting", then press
[ENTER].
2 Use [K / L] to select "Video", then
press [ENTER].
3 Use [K / L] to select a desired item,
then press [ENTER].
1
Progressive
2
TV Aspect
3
Select Video
Submenu will appear.
4
Refer 1 to 2 on this page and set
the selected item.
3 ,
• For refer to "Connection to an External
Device" on page 55.
5
When you finish with the setting,
press [SETUP] to exit.
106 EN
E9SK0UD_DVR670KU_EN_v1.1.indd 106 E9SK0UD_DVR670KU_EN_v1.1.indd 106
GENERAL SETTING
INPUT
HDMI
SELECT
ABC DEF
CH
JKL MNO
TUV WXYZ
TIMER
SPACE
PROG.
SETUP SETUP DISPLAY AUDIO
TOP MENU
ENTER ENTER
RETURN
INSTANT 1.3x/0.8x
TIME SLIP
SKIP PLAY
PLAY FWD
STOP STOP SKIP
VCR DVD
REC MODE REC
TIMER SET SEARCH ZOOM
1
Progressive (Default : OFF)
This unit is compatible with the progressive scan system.
The feature provides you with the higher definition
images than the traditional output system does. To utilize
this feature, you must set progressive scan mode to "ON".
1) Use [K / L] to select "ON", then press [ENTER].
Progressive
ON
OFF
2) Use [{ / B] to select "Yes", then press [ENTER].
Activating progressive scan:
Check your TV has progressive scan
and connect with component video cable.
NOTE :
If there is no picture or picture is
distorted after selecting "Yes",
Wait about 15 seconds for auto recovery.
Activate? Yes
3) Use [K / L] to select "Yes" within 15 seconds, then
press [ENTER].
Your setting will be activated.
Note
• If your TV is compatible with progressive scan (480p), you
are recommended to use the HDMI or component video
cable (commercially available) to connect this unit to the
TV. (Refer to pages 21-22.) If not, use the RCA video cable
and set the progressive scan to "OFF".
• If the Progressive Scan image is distorted, you can
cancel Progressive Scan by pressing and holding
[SETUP] for more than 3 seconds during DVD
playback. The "Progressive" setting will be "OFF".
• When selecting "No" or not pressing any buttons on
the unit or remote control within 15 seconds at step 3,
progressive scan remains to be "OFF" (interlace scan).
2
TV Aspect (Default: 16:9 Wide)
You can select the TV aspect ratio to match the formats of
what you are playing back with the unit and your TV
screen (4:3 standard or 16:9 widescreen TV).
Use [K / L] to select a desired option, then press [ENTER].
TV Aspect
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
If you have a standard TV:
Select "4:3 Letter Box", so that black bars appear on the
top and bottom of the TV screen when playing back a
wide-screen picture. Select "4:3 Pan & Scan" for a full
height picture with both sides trimmed when playing
back wide-screen picture.
If you have a widescreen TV:
Select "16:9 Wide".
No
2009/04/03 15:40:01 2009/04/03 15:40:01