Tuning To A Specific Channel (Programmed Or Unprogrammed); Switching Between Two Channels Using Channel Return; Switching Between Two Channels Using Surflock - Toshiba 50M2U User Manual

64
Using the TV's features
Tuning channels using the Channel Browser

Tuning to a specific channel (programmed or unprogrammed)

To tune analog channels:
Press the Channel Number (0–9) on the remote control. For
example, to select channel 125, press 1, 2, 5, and then press the
ENTER button.
Tuning digital channels:
Press the Channel Number (0–9) on the remote control, followed by
the (Dash 100) button, and then the sub-channel number. For
example, to select digital channel 125-1, press 1, 2, 5, –, 1, and then
press the ENTER button.
NOTE

Switching between two channels using Channel Return

The Channel Return feature allows you to switch between two
channels without entering an actual channel number each time.
1 Select the first channel you want to view.
2 Select a second channel using the Channel Number buttons
(and the (Dash 100) button if selecting a digital channel).
3 Press the CH RTN button on the remote control.
The previous channel will display. Each time you press the CH
RTN button, the TV will switch back and forth between the
last two channels that were tuned.
NOTE

Switching between two channels using SurfLock™

The SurfLock™ feature temporarily "memorizes" one channel to
the CH RTN button, so you can return to that channel quickly from
any other channel by pressing the CH RTN button.
To memorize a channel to the CH RTN button:
1 Tune the TV to the channel you wish to program into the CH
RTN button.
If a digital channel is not programmed, either through the automatic
channel scan or the Channel add function, see
page 47, you will have to tune the RF channel using the Channel
Numbers and the (Dash 100) button on the remote control.
If you press the CH RTN button from a non-antenna input, the TV will
return to the last-viewed input.
"Auto Tuning" on