Setting Channel Skip - Toshiba 50M2U User Manual

Integrated high definition led television
Table of Contents

Advertisement

50
Setting up your TV

Setting channel skip

Setting channel skip
To prevent a channel from being viewed, you can set it to be
skipped.
1
From the Setup menu, highlight Installation, and then press the
ENTER button.
2
Press the ( /
then press the ENTER button.
The list of channels appears.
(Sample Illustration) List of channels
3
Press the ( /
be skipped, and then press the ENTER button.
A check will appear in the box. To remove the check, press the
ENTER button again.
To add a channel to the channel memory:
Highlight the checked box next to the channel number you
wish to add, and then press the ENTER button to remove the
check.
NOTE
To manually add digital sub-channels on a physical channel:
Use the Channel Numbers and the (Dash 100) on the remote
control to enter the channel number (for example, 56–1).
If the channel is found, the number will be added to the list and
the box will be unchecked. If the channel is not found, a
message appears.
arrow) buttons to select Channel Options, and
arrow) buttons to select a channel position to
You can also block specific channels so that they cannot be tuned
until you unlock them. For information, see
page 91
"Locking channels" on

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents