Unlocking Programs; Locking Channels; Input Lock Feature - Toshiba 40SL500U Owner's Manual

Note:
• If you place an "5" in the box next to "Rated "None"",
programs rated "None" or "Not Rated" will be blocked;
however, programs that do not provide any rating
information will not be blocked.
• To display the rating of the program you are watching,
press on the remote control. If it is rated "None," the
INFO
word "NONE" appears in the INFO screen (as shown
below right). If rating information is not provided, no
rating will appear in the INFO screen.
TV - PG L V

Unlocking programs

If you try to tune the TV to a program that exceeds the
rating limits you set, the TV will enter program lock
mode and a warning message will appear on-screen.
Follow the instructions to temporarily unlock the
program.
Chapter 6: Basic features
NONE

Locking channels

With the Lock feature, you can lock specific channels.
The locked channels can only be accessed by entering
the PIN (- "Setting the PIN code" on page 43).
1
From the SETUP menu, highlight TV Settings and
press .
OK
2
Press B or b to select Channel Options and press
. The list of channels will appear.
OK
Channel Options
Ch. Type
5-1 DTV
6
ATV
6-1 DTV
8 ATV
9 ATV
ATV
10
ATV
11
12 ATV
3
Press c and then B or b to select a channel in the
lock column, and then press
4
PIN code entry will be required to set a locked
channel.
Note: If the PIN code has not been set yet, a warning
message will appear.
5
A check will appear in the box.
To remove the check, press

Input lock feature

You can use the Input Lock feature to lock the video
inputs and channels 3 and 4. You will not be able to
view the input sources or channels until you unlock the
inputs.
1
From the PREFERENCES menu, highlight
Parental Control and Locks and press
2
Enter your four-digit PIN code.
3
Press B or b to highlight Input Lock.
4
Press C or c to select Video, Video+ or Off and
press .
EXIT
Mode Description
Locks Video, ColorStream HD, HDMI 1, HDMI
Video
2, HDMI 3, HDMI 4, and PC.
Locks Video, ColorStream HD, HDMI 1, HDMI
2, HDMI 3, HDMI 4, PC and channels 3 and 4.
Video
+
• Select Video+ if you play video tapes via the
ANT/CABLE input.
Off Unlocks all video inputs and channels 3 and 4.
.
OK
again.
OK
.
OK
45