Using The Hdmi Settings Feature; Setting The Hdmi Audio Mode - Toshiba Regza 40XV645U Owner's Manual

Integrated high definition lcd television
Hide thumbs Also See for Regza 40XV645U:
Table of Contents

Advertisement

Using the HDMI settings feature

This menu consists of the following items (new HDMI
capabilities) and will be grayed out on non-HDMI
inputs.
Some HDMI legacy sources may not work properly
with your HDMI TV, please try setting the following
options (Deep Color, Lip Sync, INSTAPORT™, and
RGB Range) to Off. Adjusting these settings should
allow your HDMI legacy source to operate properly
with your TV.
•Deep Color: On
This feature allows the HDMI source to increase
available colors bits within the boundaries defined by
the RGB or YCbCr color space.
•Lip Sync: On
The Lip Sync feature allows an HDMI source such as
an audio receiver to adjust audio delay to match the
video processing delay of the TV.
•INSTAPORT™: On
This feature reduces the lag of switching time when
switching HDMI sources.
•RGB Range: Auto
This feature adjusts RGB full range signal
automatically
When Limit is selected, RGB output signal is output in
the range from 16 to 235. When Full is selected, RGB
output signal is output in the range from 0 to 255.
All of the above HDMI settings need proper HDMI
source devices. If an HDMI source device does not
support these features, the TV may not work properly
when these features are enabled.
Note: If your HDMI connection is capable of 1080p and/or
your TV is capable of refresh rates greater than 60Hz or
supports Deep Color, you will need a High Speed HDMI™
cable. Conventional HDMI/DVI cables may not work
properly with this mode.
1
Select the appropriate HDMI input mode (HDMI 1,
HDMI 2, or HDMI 3).
2
From the SETUP menu, highlight AV Connection
and press T.
3
Press B or b to select HDMI Settings.
4
Press B or b to highlight the item you want to set.
5
Press C or c to select your desired setting.
Chapter 6: Using the TV's features

Setting the HDMI audio mode

To set the HDMI audio mode:
1
From the SETUP menu, highlight AV Connection
and press T.
2
Press B or b to select PC/HDMI 1 Audio.
3
Press C or c to select HDMI 1.
4
Press B or b to select HDMI 1 Audio.
5
Press C or c to select Auto, Digital or Analog. (Auto
is the recommended mode.)
Mode
Auto
Digital
Analog
Description
When viewing the HDMI 1 input, if
digital audio from the HDMI input is
available, it will be output. If not, the TV
will automatically detect and output
analog audio from the PC/HDMI 1
Audio input.
When viewing the HDMI 1 input, digital
audio from the HDMI input will be
output.
When viewing the HDMI 1 input,
analog audio from the PC/HDMI Audio
input will be output.
51

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents