Setting The On Timer; Setting The Sleep Timer - Toshiba Regza 40XV645U Owner's Manual

Setting the On Timer

You can set the on timer to automatically turn on the TV
to a preset channel or input at a preset time.
To activate the On Timer:
1
From the APPLICATIONS menu, highlight On
Timer and press T.
2
Press B or b to select Enable On Timer, and then
press C or c to select On.
Note: If the Enable On Timer is set to Off, other menus
under On Timer cannot be changed.
To set the On Timer:
1
From the APPLICATIONS menu, highlight On
Timer and press T.
2
Press B or b to highlight the item you want to
change, and then press C or c to make your desired
adjustment.
Item Description
To select video input source (ANT/CABLE,
Video 1, Video 2, ColorStream HD1,
Input
ColorStream HD2, HDMI 1, HDMI 2,
HDMI 3, or PC).
Channel To select the channel when the TV turns on.
Volume To set the volume when the TV turns on.
To set the time when the TV turns on from
Time until
now with C or c or the number buttons
Power On
(maximum of 12 hours and 50 minutes).
Note:
• While the On Timer is set to On, the On Timer LED is
turned on (- "LED indications" on page 61).
• If you do not operate the TV for 1 hour after it is powered
on by the On Timer feature, the TV will automatically turn
itself off.
To cancel the On Timer:
1
From the APPLICATIONS menu, highlight On
Timer and press T.
2
Press B or b to select Enable On Timer.
3
Press C or c to select Off.
48
Chapter 6: Using the TV's features

Setting the Sleep Timer

You can set the sleep timer to turn off the TV after a set
length of time (maximum of 12 hours and 50 minutes).
To set the sleep timer using the remote control:
Press [ on the remote control to set the length of time
until the TV turns off. Repeatedly press [ to increase
the time in 10-minute increments, or press B or b to
increase or decrease the time in 10-minute increments,
to a maximum of 12 hours and 50 minutes.
To set the sleep timer using the on-screen menus:
1
From the APPLICATIONS menu, highlight Sleep
Timer and press T.
2
Press the number buttons to enter the length of time
or press C or c to increase or decrease in 10-minute
increments (maximum of 12 hours and 50 minutes).
Note: When a power failure occurs, the sleep timer setting
may be cleared.
To display the remaining sleep time:
Press [.
To cancel the sleep timer:
Repeatedly press [ until it is set to 0 minutes.