Setting The Time Zone; Selecting The Location; Selecting The Toshiba Illumination Mode; Selecting The Power-On Mode - Toshiba Regza 40XV645U Owner's Manual

Setting the time zone

The Time Zone setup will allow you to specify the
correct time zone for your region. This feature will
allow the TV status information to show the correct
time zone information for your viewing area.
1
From the SETUP menu, highlight TV Settings and
press T.
2
Press B or b to select Local Time Setting and press
T.
3
Highlight Time Zone and press C or c to set your
desired time zone.
4
If you want to activate the daylight saving time,
highlight Daylight Saving Time.
5
Press C or c to select On and press O.

Selecting the location

You can select Home or Store for the TV location. For
normal home use, select Home.
1
From the SETUP menu, highlight Location.
2
Press C or c to select Home and press O.
Selecting the TOSHIBA
Illumination mode
You can set the illumination mode of the TOSHIBA logo
located on the front panel to On or Off.
1
From the PREFERENCES menu, highlight
TOSHIBA Illumination.
2
Press C or c to select either On or Off, then press O.
30
Chapter 5: Setting up your TV

Selecting the Power-On Mode

You can select either Power-Saving or Fast mode.
•Power-Saving mode keeps power consumption in
standby mode to below 1W. As a result, it takes a bit
longer for the TV to turn on.
•Fast mode increases power consumption in standby
mode. As a result, the TV will turn on more quickly.
1
From the SETUP menu, highlight Power-On
Mode.
2
Press C or c to select either Power-Saving or Fast,
then press O.
Select Power-Saving for optimal energy efficiency.

Using Blue Screen

With the Blue Screen feature, the screen will turn blue
and the sound will be muted on analog channels and
external input modes when no signal is received.
1
From the PREFERENCES menu, highlight Blue
Screen.
2
Press C or c to select On, and press O.

Setting the screen transparency

You can set the transparency of the on-screen display
system.
1
From the PREFERENCES menu, highlight
Transparency.
2
Press C or c to select Low, Middle, High or Off, and
press O.