Setting Up A Printer; Turning Off The Computer - Toshiba R830-S8310 User Manual

To connect a printer to your computer:
1 Connect the printer cable to the printer and then connect the
other end to one of the computer's USB ports.
2 Plug the printer's power cable into a live AC outlet.

Setting up a printer

NOTE
If your printer does not support Plug and Play, follow these steps to
set it up for the first time. You only need to set up the printer once.
1 Click Start, Control Panel, Hardware and Sound, and then
under Devices and Printers, click Add a printer.
The Add Printer Wizard appears.
(Sample Image) Add Printer Wizard
2 Follow the on-screen instructions to set up your printer.

Turning off the computer

Some printers require a specific installation process. Refer to your
printer installation guide for instructions before completing the
following procedure.
Pressing the power button before shutting down the Windows
operating system could cause you to lose your work. Make sure the
system indicator panel's storage drive light and the drive in-use light
are off. If you turn off the power while a disk/disc is being accessed,
you may lose data or damage the disk/disc and/or drive.
Getting Started
Turning off the computer
87
®