User Guide Self Contained Wireless Alarm System v1.0 N11427 WARNING: This manual contains information on limitations regarding product use and function and information on the limitations as to liability of the manufacturer. The entire manual should be carefully read.
FCC COMPLIANCE STATEMENT CAUTION: Changes or modifications not expressly approved by Dig- ital Security Controls could void your authority to use this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence in a residential installation.
About Your Security System Your Security System has been designed to provide you with the greatest possible flexibility and con- venience. Read this manual carefully and have your installer instruct you on your system's operation and on which features have been implemented in your system. All users of this system should be equally instructed in its use.
Controls & Indicators IMPORTANT NOTICE A security system cannot prevent emergencies. It is only intended to alert you and – if included – your central station of an emergency situation. Security systems are generally very reliable but they may not work under all conditions and they are not a substitute for prudent security practices or life and property insurance.
Night Arming To fully arm the system when it has been armed in Stay Mode, press at the keypad. All inte- rior zones will now be armed except for devices programmed as Night Zones. Night zones are only armed in Away mode, this permits limited movement within the premises when the system is fully armed.
Remote Arming and Disarming The system can be armed and/or disarmed (if programmed by the installer) using a remote control device (wireless key). When arming the system by using the Arm button on the wireless key, the system will acknowledge the command by sounding a single bell squawk and when disarming using the Dis- arm button on the wireless key the system will acknowledge the command by sounding two bell squawks .
bypassed when arming your system. Zones cannot be bypassed once the system is armed. Bypassed zones are automatically cancelled each time the system is disarmed and must be bypassed again, if required, before the next arming. Bypassing Zones With the system disarmed. 1.
To select a Bypass Group when arming the system: 1. Press , then your [access code] (if necessary). 2. Press . The next time the system is armed, the zones in this group will be bypassed. 3. To exit bypassing mode and return to the Ready state, press NOTE: A Bypass Group is only recalled if the system is armed/disarmed after programming the by- pass group.
Access Code Programming In addition to the Master Access Code, you can program up to 16 additional User Access codes. Press , plus your Master Access Code, the armed ( ) indicator will turn on. Enter the 2-digit number to be programmed (i.e. 06 for user access code 6; enter 40 for the Master Access Code) or use the 4 -digit access code.
Bell Squawk Attribute This attribute is used to determine whether an access code should generate an arming/disarming Bell Squawk upon entry of the code for Away arming. The Wireless Keys with access codes associated with them may generate Arming/Disarming Bell squawks. If desired, this option may be used with codes that are manually entered.
2. Use the keys to scroll to Buzzer Control. 3. There are 21 different levels, use the Viewing the Event Buffer The event buffer will show you a list of the last 128 events that have occurred on your system. 1.
Reference Sheets Fill out the following information for future reference and store this guide in a safe place. System Information Enabled? FIRE The Exit Delay Time is _______ seconds. The Entry Delay Time is _______ seconds. For Service Central Station Information Account#: ___________________ Telephone#: __________________ Installer Information: Company: ___________________ Telephone#: __________________...
Guidelines for Locating Smoke Detectors Research has shown that all hostile fires in homes generate smoke to a greater or lesser extent. Experiments with typical fires in homes indicate that detectable quantities of smoke precede detectable levels of heat in most cases. For these reasons, smoke alarms should be installed out- side of each sleeping area and on each storey of the home.
Household Fire Safety Audit Read this section carefully for important information about fire safety. Most fires occur in the home. To minimize this danger, we recommend that a household fire safety audit be conducted and a fire escape plan be developed. 1.
WARNING Please Read Carefully N o te t o In s ta l l er s This warning contains vital information. As the only individual in contact with system users, it is your responsibility to bring each item in this warn- ing to the attention of the users of this system.