Download Print this page

Samsung LT-P1745 Connection Manual

Samsung ltp1745 flat panel tv connection guide
Hide thumbs Also See for LT-P1745:

Advertisement

victoryia 01-14
1/10/04 1:02 AM
Y
O U R
Rear Panel Jacks
Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.
Page 3
N
TV
E W
POWER INPUT
PC VIDEO INPUT
Connect to the video output port on your PC.
COMPONENT 2
Connect a component video/audio.
COMPONENT 1
Connect a component video/audio.
TV ANTENNA
Connects to an antenna or to a cable
TV system.
AUDIO INPUT
Connect an audio signal(L/R) from a
camcorder or VCR.
VIDEO INPUT
Connect a video signal from a
camcorder or VCR.
SUPER VIDEO INPUT
Connect an S-Video signal from a
camcorder or VCR.
PC SOUND INPUT
HEADPHONE JACK
Connect a set of external headphones to
this jack for private listening.
KENSINGTON LOCK
1
English-

Advertisement

loading

Summary of Contents for Samsung LT-P1745

  • Page 1 01-14 1/10/04 1:02 AM O U R Rear Panel Jacks Use the rear panel jacks to connect an A/V component that will be connected continuously, such as a VCR or a DVD player. POWER INPUT PC VIDEO INPUT Connect to the video output port on your PC.
  • Page 2: Connecting A Vcr

    These instructions assume that you have already connected your TV to an antenna or a cable TV system . Skip step 1 if you have not yet connected to an antenna or a cable system. Unplug the cable or antenna from the back of the TV.
  • Page 3: Connecting An S-Vhs Vcr

    N S TA L L AT I O N Connecting an S-VHS VCR Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This connection delivers a better picture as compared to a standard VHS VCR).
  • Page 4: Connecting A Dvd Player

    1/12/04 1:51 AM N S TA L L AT I O N Connecting a DVD Player The rear panel jacks on your TV make it easy to connect a DVD player to your TV. Connect a set of audio cables between the...
  • Page 5: Connecting A Pc

    N S TA L L AT I O N Connecting a PC Note: This figure shows the Standard Connector-jack panel. The actual configuration on your TV may be different, depending on the model. TV rear panel PC VIDEO INPUT (24-pin DVI) •...
  • Page 6: How To Connect The Cables And Stand Base

    Attach the stand to the TV set as shown in the picture. Note : The curved side of the stand base should be placed toward the back of the TV set as shown in the above figure. Do NOT lift the TV set by the stand.