Card Stock/Custom-Sized Paper; Letterhead/Preprinted Paper; Using The Output Support - Samsung ML-1865W User Manual

Exposed areas can cause labels to peel off during printing, which can
cause paper jams. Exposed adhesive can also cause damage to
machine components.
• Do not run a sheet of labels through the machine more than once. The
adhesive backing is designed for only a single pass through the
machine.
• Do not use labels that are separating from the backing sheet or are
wrinkled, bubbled, or otherwise damaged.

Card stock/Custom-sized paper

Postcards, cards and other custom-sized materials can be printed with this
machine.
• Do not print on media smaller than 76 mm (3.00 inches) wide or 183 mm
(7.20 inches) long.
• In software applications, set the margins at least 6.4 mm (0.25 inches)
away from the edges of the material.

Letterhead/Preprinted paper

Single-sided
Face up Face down
• Letterhead/ Preprinted paper must be printed with heat-resistant ink that
will not melt, vaporize, or release hazardous emissions when subjected
to the machine's fusing temperature (about 170°C(338 °F) for 0.1
second.
• Letterhead/ Preprinted paper ink must be non-flammable and should not
adversely affect machine rollers.
• Forms and letterhead should be sealed in a moisture-proof wrapping to
prevent changes during storage.
• Before you load letterhead/preprinted paper, verify that the ink on the
paper is dry. During the fusing process, wet ink can come off preprinted
paper, reducing print quality.

Using the output support

The surface of the output tray may become hot if you print a large
number of pages at once. Make sure that you do not touch the
Double-sided
Media and tray_ 40
surface, and do not allow children near it.
The printed pages stack on the output support, and the output support will
help the printed pages to align. The printer sends printouts to the output tray
by default.