Common Macintosh Problems - Samsung SCX-3200 Series User Manual

CONDITION
I cannot scan via Check if Gimp Front-end has Xsane: Device
Gimp Front-end. dialog on the Acquire menu. If not, you should
install Xsane plug-in for Gimp on the your
computer. You can find Xsane plug-in package for
Gimp on Linux distribution CD or Gimp home
page. For the detailed information, refer to the
Help for Linux distribution CD or Gimp Front-end
application.
If you wish to use another kind of scan
application, refer to application's Help.
I encounter the Avoid changing print job parameters (via LPR
"Cannot open port GUI, for example) while a print job is in progress.
device file" error Known versions of CUPS server break the print
when printing a job whenever print options are changed and then
document. try to restart the job from the beginning. Since
Unified Linux Driver locks the port while printing,
the abrupt termination of the driver keeps the port
locked and unavailable for subsequent print jobs.
If this situation occurs, try to release the port by
selecting Release port in Port configuration
window.
The machine does • Ensure your machine is attached to your
not appear on the computer, connected properly via the USB port,
scanners list. and is turned on.
• Ensure the scanner driver for your machine is
installed in your system. Open Unified Linux
Driver configurator, switch to Scanners
configuration, then press Drivers. Make sure
that driver with a name corresponding to your
machine's name is listed in the window.
• Ensure the port is not busy. Since functional
components of machine (printer and scanner)
share the same I/O interface (port), the
situation of simultaneous access of different
user applications to the same port is possible.
To avoid possible conflicts, only one of them at
a time is allowed to gain control over the
device. The other user will encounter "device
busy" response. This usually happens when
starting a scan procedure. An appropriate
message box appears.
To identify the source of the problem, open the
Ports configuration and select the port
assigned to your scanner, port's symbol
/dev/mfp0 corresponds to LP:0 designation
displayed in the scanners' options, /dev/mfp1
relates to LP:1, and so on. USB ports start at
/dev/mfp4, so scanner on USB:0 relates to
/dev/mfp4 respectively and so forth
sequentially. In the Selected port pane, you
can see if the port is occupied by another
application. If this is the case, you should either
wait for completion of the current job or press
the Release port button, if you are sure that
the present port application is not functioning
properly.
SUGGESTED SOLUTIONS
Troubleshooting_ 88
CONDITION
The machine does • Ensure a document is loaded into the machine,
not scan. ensure your machine is connected to the
computer.
• If there is an I/O error while scanning.
Refer to the Linux User's Guide that came with your computer for
further information on Linux error messages.

Common Macintosh problems

CONDITION
The machine does Printing the PDF file as an image may enable the
not print PDF files file to print. Turn on Print As Image from the
correctly. Some Acrobat printing options.
parts of graphics,
It will take longer to print when you print a
text, or illustrations
PDF file as an image.
are missing.
The document has Update your Mac OS to Mac OS X 10.3.3. or
printed, but the print higher.
job has not
disappeared from
the spooler in Mac
OS X 10.3.2.
Some letters are not Mac OS cannot create the font during the Cover
displayed normally page printing. The English alphabet and numbers
during the Cover are displayed normally on the Cover page.
page printing.
When printing a Make sure that the resolution setting in your
document in machine driver matches the one in Acrobat
Macintosh with Reader.
Acrobat Reader 6.0
or higher, colors
print incorrectly.
Refer to the Macintosh User's Guide that came with your computer for
further information on Macintosh error messages.
SUGGESTED SOLUTIONS
SUGGESTED SOLUTIONS