Using A Wired Network; Network Environment - Samsung SCX-3200 Series User Manual

network setup (scx-3205w(k) only)
3.
This chapter gives you step-by-step instructions for setting up the network connected machine and software.
This chapter includes:
•

Network environment

• Introducing useful network programs
•

Using a wired network

NETWORK ENVIRONMENT
You need to set up the network protocols on the machine to use it as your
network machine. You can set up the basic network settings through the
network setting programs.
The following table shows the network environments supported by the
machine.
ITEM
Network interface •
•
Network operating system •
•
•
Network protocols •
•
•
•
•
•
Wireless security •
•
a. Depending on your country, wireless LAN card may not be available.
For some counties, only 802.11 b/g can be applied. Contact your local
Samsung dealer or the retailer where you bought your machine.
INTRODUCING USEFUL NETWORK PROGRAMS
There are several programs available to setup the network settings easily in
network environment. For the network administrator especially, managing
several machines on the network is possible.
Before using the programs below, set the IP address first.
REQUIREMENTS
Ethernet 10/100 Base-TX
a
802.11b/g/n Wireless LAN
Windows 2000/Server 2003 /Server
2008/XP/Vista/7/Server 2008 R2
Various Linux OS
Mac OS X 10.3 ~ 10.6
TCP/IPv4
DHCP, BOOTP
DNS, WINS, Bonjour, SLP, UPnP
Standard TCP/IP Printing (RAW), LPR,
IPP
SNMPv 1/2/3, HTTP
TCP/IPv6 (DHCP, DNS, RAW, LPR,
SNMPv 1/2/3, HTTP)
(See "IPv6 Configuration" on page 34.)
Authentication: Open System, Shared
Key, WPA Personal, WPA2 Personal
(PSK)
Encryption: WEP64, WEP128, TKIP,
AES
Network setup (SCX-3205W(K) only)_ 30
• Installing network connected machine's driver
• IPv6 Configuration
SyncThru™ Web Service
Web server embedded on your network machine, which allows you to do
the following tasks.
• You can configure the network parameters necessary for the machine to
connect to various network environments.
• You can customize machine settings
(See "Using SyncThru™ Web Service (SCX-3205W(K) only)" on
page 69).
SyncThru™ Web Admin Service
Web-based machine management solution for network administrator.
SyncThru™ Web Admin Service provides you with an efficient way of
managing network devices and lets you remotely monitor and troubleshoot
network machines from any site with corporate internet access.
• Download this program from http://solution.samsungprinter.com.
SetIP
This utility program allows you to select a network interface and manually
configure the IP addresses for use with the TCP/IP protocol.
• See "IPv4 setting using SetIP Program (Windows)" on page 31.
• See "IPv4 setting using SetIP Program (Macintosh)" on page 31.
• See "IPv4 setting using SetIP Program (Linux)" on page 32.
TCP/IPv6 is not supported by this program.
USING A WIRED NETWORK
You must set up the network protocols on your machine to use it on your
network. This chapter will show you how this is easily accomplished.
You can use network after connecting network cable to a corresponding
port on your machine.
Printing a network configuration report
You can print a network configuration report from the machine's control
panel that will show the current machine's network settings. This will help
you to set up a network and troubleshoot problems.