SECO-LARM ENFORCER VC-1 Series Manual

SECO-LARM BNC VIDEO CONVERTERS
On-Screen Display (OSD) Programming and Menu Controls:
Note for VC-2VxQ
First select either NTSC or PAL from the front panel
setting switches (Default is NTSC)
OSD Display VC-1BxQ VC-3BxQ
Brightness X X
Contrast X X
Color Saturation X X
Tint / Hue X X
Sharpness
X
Resolution X
Horizontal Size
Vertical Size
Flicker
OSD Background
Troubleshooting:
VGA device does • Make sure power, input, and output cables are firmly connected to the converter.
not function
• Make sure the video input device is turned on.
correctly
• Make sure the video output device is turned on.
• Test the coaxial cable between the video source and converter to ensure it is
functional.
• Test the VGA cable between the video monitor and converter to ensure it is
functional.
• Ensure the monitor used supports 720 x 480 resolution (for VC-1BxQ)
• Ensure the monitor used can support the resolution selected (for VC-3BxQ)
• Ensure that switches are set correctly for NTSC/PAL (for VC-2VxQ)
Power LED
• Make sure power is connected to the converter
indicator not lit
WARRANTY This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM's obligation is
limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect,
repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines
that such equipment is not operating properly as a result of causes other than defects in material and workmanship. The
sole obligation of SECO-LARM, and the purchaser's exclusive remedy, shall be limited to replacement or repair only, at
SECO-LARM's option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential
personal or property damages of any kind to the purchaser or anyone else.
NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the
SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right to
change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors. Copyright
© 2014 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or in part,
without the written permission of SECO-LARM.
®
SECO-LARM U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326
4
NTSC / PAL Select
Setting 1 2
NTSC ON ON
PAL OFF OFF
VC-2VxQ Description
X Determines the relative amount of light displayed
Determines the relative difference between light and
X
dark objects
Determines the relative shade of the colors
X
displayed
Determines the relative hue of the colors displayed
X
on the screen
Determines the relative definition of images
X
displayed
Choose between 640x480, 800x600, 1024x768, and
1280x1024 (only VC-3BxQ supports 1280x1024)
X Set the horizontal image size
X Set the vertical image size
X Adjust image flicker
X Choose the background color of the OSD screen
Website: www.seco-larm.com
E-mail: sales@seco-larm.com
SECO-LARM U.S.A., Inc.
BNC to VGA
VC-1 Series
Model #
VC-1BAQ
VC-1BBQ
VC-3BAQ*
VC-3BBQ*
VC-2VAQ**
VC-2VBQ**
*with additional BNC loop-through
Features:
BNC to VGA (VC-1 Series, VC-3 Series)
• Converts almost any VGA monitor into a security
monitor
• Compact, perfect for plug and play installations
• Desktop, wall or VESA mountable
• On-screen display (OSD) for image adjustment
• Automatically detects NTSC / PAL
• Video input auto-configure
• Memory retains settings after power failure
• Dual output for VGA and BNC supporting
resolutions: up to 1280x1024 (VC-3BxQ only)
MiVC-xxxQ_1407.docx
PITSW4
BNC Video Converters
MANUAL
BNC to VGA
VC-3 Series
Features
BNC to VGA
BNC to VGA (High Resolution)
VGA to BNC
**with additional VGA loop-through
VGA to BNC (VC-2 Series)
• Connect a DVR with VGA output to an existing monitor
with BNC input
• Video standards: NTSC/PAL
• Auto configure resolution: up to 1024x768 (up to 75Hz)
• Dual output ports: composite video (BNC) and VGA
• On-screen display (OSD) for image adjustment
including size, brightness, contrast, hue, saturation,
sharpness, and more
• Quick installation, no driver or operating system
requirements
VGA to BNC
VC-2 Series
Power Adapter
Included
Not Included
Included
Not Included
Included
Not Included