cOnnecting tHe crystaL sUrrOUnD air tracK
This section explains two ways (digital and analog) of connecting the unit to a TV.
This unit is equipped with one optical digital jack and one audio analog jack for connecting a TV.
OPTICAL IN
AUX IN
OPtICAl In
Connect the Digital Input on the main unit to the OPTICAL OUT of the TV or Source Device.
or,
AUx In
Connect AUX IN (Audio) on the main unit to the AUDIO OUT of the TV or Source Device.
Be sure to match connector colors.
▪
Do not connect the power cord of this product or your TV to the wall outlet until all
connections between components are complete.
▪
Before moving or installing this product, be sure to turn off the power and disconnect the
power cord.
▪
If you select 'AUX' without connecting the Audio Cable, the set is turned off automatically after
20 minutes.
▪
If a TV or any device connected to Air Track with the optical cable is off and there is no
digital input, the Air Track is turned off after 20 minutes. (If there has been no input signal
for over 20 minutes from OPTICAL AUDIO IN the Air Track will be turned off.)
14
Optical cable (not supplied)
or
White
audio cable
Red
OPTICAL
OUT
BD/DVD player/
set-top box/
game console
or
AUDIO
OUT
L
R
Comments to this Manuals
Latest comments:
so much so i'm going to return the product.