Epson LABELWORKS PX 203STBWPX Instruction Manual

Shrink Tube Instruction Manual
Shrink tube - information deemed reliable but not guaranteed. See manufacturer's
speci cation sheet for further information. Test for your applications.
2001XLST, 2011XLB, 2012XLST, BEE3®, BEE3®+, 2020LSTB, 2020LSTB-PC, 2010-PC, 2011XLB-PC, 2012XLST-PC, PEAR
Label ® 270, PEAR Label ® 360, BEE3®-EZ, BEE3®-EZ+, LW-PX900, LW-PX800, LW-PX750, LW-PX700, LW-PX400,
LW-PX350, LW-PX300
PART NO. INK TUBE
SIZE
*Compatibility COLOR COLOR
203STBWPX BLACK WHITE 1/8"
203STBYPX BLACK YELLOW 1/8"
203B20BWPX BLACK WHITE 1/8"
203B20BYPX BLACK YELLOW 1/8"
205STBRPX BLACK RED 3/16"
205STBYPX BLACK YELLOW 3/16"
205STBWPX BLACK WHITE 3/16"
205STWBPX WHITE BLACK 3/16"
205STBBPX BLACK BLUE 3/16"
205STBGPX BLACK GREEN 3/16"
208STBWPX BLACK WHITE 1/4"
208STBYPX BLACK YELLOW 1/4"
208B20BWPX BLACK WHITE 1/4"
210STBWPX BLACK WHITE 3/8"
211STBRPX BLACK RED 1/2"
211STBYPX BLACK YELLOW 1/2"
211STBWPX BLACK WHITE 1/2"
211STWBPX WHITE BLACK 1/2"
214STBWPX ** BLACK WHITE 9/16"
214STBYPX ** BLACK YELLOW 9/16"
221STBWPX ** BLACK WHITE 7/8"
221STBYPX ** BLACK YELLOW 7/8"
Part Number & Model Notes:
*BEE3®, BEE3®-EZ, LW-PX300 use only 203 & 205 shrink tube sizes. BEE3®+, BEE3®-EZ+, & LW-PX350 use 203
through 211 sizes. LW-PX400, LW-PX700 & LW-PX750 use only 203-214 sizes.
**Cannot be used with PEARLabel® 360
For all "20#ST" Supplies
Shrinkage Rate: 50% or more in diameter, 15% or less in length. Ratios noted.
Temperature Range: -55ºC to 125ºC (Operating)
Compliance Standards: UL Standard 224 (Rated Temperature: 125°C, Rated Voltage: 300V,
Flame Resistance Grade VW-1), RoHS compliant
For all "20#B20" Supplies Please refer to the Sumitomo B20 (3X) FLT spec sheet.
• Although the tube is made of insulating materials (polyole n), it does not meet the standards set for insulated tube
construction. Do not use the tube in locations where withstand voltage capability is required.
User Precautions
• Prints may appear distorted due to special surface materials. Prints may become diminished if the surface of the
tube is scratched or wiped with paint thinner, etc.
Internal Range
Diameter
SHRINK
of Wire
AWG
as supplied
Diameter
RATIO
mm (min) (in)
16-22 3:1 3.2 .044-.105
16-22 3:1 3.2 .044-.105
14-22 3:1 3.8 .055-.150
14-22 3:1 3.8 .055-.150
8-12 2:1 5.7 .130-.205
8-12 2:1 5.7 .130-.205
8-12 2:1 5.7 .130-.205
8-12 2:1 5.7 .130-.205
10-20 3:1 4.8 .069-.160
10-20 3:1 4.8 .069-.160
6-18 3:1 6.4 .091-.215
6-18 3:1 6.4 .091-.215
6-18 3:1 6.6 .095-.240
4-12 3:1 9.5 .138-.315
2-8 2:1 10.9 .228-.409
2-8 2:1 10.9 .228-.409
2-8 2:1 10.9 .228-.409
2-8 2:1 10.9 .228-.409
0-5 2:1 13 .303-.492
0-5 2:1 13 .303-.492
0000-1 2:1 20 .461-.768
0000-1 2:1 20 .461-.768
• When the tube shrinks, the printed characters may become distorted and di cult to read. Printed bar codes may
also become undecipherable.
• This product is not intended for use on any person or animal.
• Avoid storing this product in places with high temperatures or humidity. Do not expose this product to direct
sunlight, dust particles or the outdoors. For best results, use this product immediately after it is removed from its
packaging.
Shrink Tube material requires a higher ribbon concentration to print solid characters on the thicker
Range shrink tube material. Based on your machine model, follow these instructions to increase print density.
of Wire
1. Set the cartridge in the 2011XLB, 2012XLST, 2012XLST-PC, 2010-PC, BEE3®, BEE3®+, 2020LSTB,
Diameter
2020LSTB-PC, BEE3®-EZ, BEE3®-EZ+, PEARLabel® 270, PEARLabel®360 or LABELWORKS PX printers.
(mm)
Note: The LW-PX300 DOES NOT have adjustable print density.
1.11-2.66
FOR 2001XLST, 2012XLST, BEE3®, BEE3®+, BEE3®-EZ, BEE3®-EZ+, LW-PX350
1.11-2.66
2. Press "Shift" + "Condition". Arrow down to density (PrnDensity on
1.40-3.30
BEE3® or BEE3®+, LW-PX350) and press "Return".
1.40-3.30 3. Now arrow to "+3" and press Return.
4. Now enter characters. Then Print.
3.30-5.20
FOR 2020LSTB
3.30-5.20
2. Press "Shift" + "Setting/Extra". Arrow to Print density, Return.
3.30-5.20
3. Arrow to +3, Return.
4. Now enter characters. Then print.
3.30-5.20
1.75-4.06 FOR 2010-PC, 2011XLB-PC, 2012XLST-PC, 2020LSTB-PC,
PEARLabel® 270, PEARLabel® 360, LW-PX800
1.75-4.06
2. Create label using Label Editor Software.
2.31-5.46
3. Choose File, Printer Settings. On the Graphics Tab, Move
2.31-5.46 concentration to + 3. Click OK. File. Print.
2.40-6.10
For LW-PX400 & iLabel App (the datacom app has no density setting)
1. Tap the [gear] icon at the bottom right corner and adjust to +3.
3.50-8.00
For LW-PX900, LW-PX750 & LW-PX700
5.80-10.40
Print density is automatically set. No further settings are necessary.
5.80-10.40
Surface Mounting
5.80-10.40
5.80-10.40
1. Place the tube over the wire or cable.
7.70-12.50
2. Blow hot air across the tube using a heat gun* to shrink the tube.
7.70-12.50
3. When the tube ts snugly against the surface, the shrinking process is nished.
DO NOT OVER HEAT THE SHRINK TUBE MATERIAL.
11.70-19.50
* Use a heat gun when performing the heat shrinking process in order to
11.70-19.50
achieve proper shrinking levels.
All Shrink Tube 96"
 Use only a heat gun that meets industrial standards during the heat shrinking process. Use caution when
handling the heat gun.
 Do not use soldering irons, cigarette lighters, an open ame or home hair dryers to avoid the accidental
ignition of a re.
 Do not apply heat to any surface for an extended period of time, even when the operating temperature
is within the recommended range.
 Coloring of the tube may be altered, characters may disappear, and surfaces may be damaged or
discolored depending on the construction of the surface, the environmental conditions and the
conditions during adhesion.
Please select an unnoticeable location for testing the actual results of the product prior to use.
 Avoid surfaces that do not provide su cient heat resistance. Heat shrinking can damage surfaces that
are not conducive to high temperatures.
 Avoid direct contact with the tubes during or immediately after shrinking to prevent injuries.
P: 715-247-4440 or 800.622.6312 F: 715-247-4003 or 800.522.9108
info@labelworks.epson.com
K-Sun Corporation, 370 SMC Drive, PO Box 309, Somerset WI 54025
| www.labelworks.epson.com
413762600