Samsung DVD-HR753 Instruction Manual page 12

Using a DVD-R
Formatting disc is unnecessary and only V Mode
Recording is supported. You can play these type of
discs on various DVD components only when they
have been fi nalised.
Using a DVD+RW
• For an unused DVD+RW disc, a message that asks
whether to format a disc or not. If you select
"DVD+RW", formatting will be started.
• With DVD+RW discs, there is no difference between
DVD-Video format (Video mode) and DVD-Video
Recording format (VR mode).
Using a DVD+R
This type of disc will be formatted automatically.
M

You can only use either the VR or Video mode
on a DVD-RW, but not both at the same time.

You can format a DVD-RW to V or VR mode
using Disc Manager. It should be noted that
the disc's data will be lost when changing
formats.
Step 3: Recording
There are two different recording methods, Direct
Recording and Timer Recording. Timer recording is
classifi ed as follows:
Recording mode : XP (high quality mode), SP
(standard quality mode), LP (long recording mode),
and EP (extended mode) according to the recording
mode. When recording is set in the FR mode, the best
quality picture is recorded with regards to the
remaining time on the disc.
Step 4: Playing
You can select the title you want to play in a displayed
menu and then immediately start playback.
A DVD consists of sections, called titles, and sub-
sections, called chapters.
During recording, a title is created between two points
where you start and stop recording.
Chapters will be created automatically when you
fi nalise recording on DVD-RW/-R discs in Video mode.
The chapter's length (interval between chapters) varies
according to the recording mode.
Step 5: Editing a recorded disc
Editing on discs is easier than conventional video
tapes. The HDD & DVD RECORDER supports many
different edit functions, possible only with DVDs and
HDD.
With a simple and easy edit menu, you can operate
various edit functions, such as delete, copy, rename,
lock, etc., on a recorded title.
Creating a playlist (DVD-RAM/-RW in VR mode,
HDD)
With this HDD & DVD RECORDER, you can create a
new playlist on a disc and edit it without the original,
pre-existing recording.
Step 6: Finalising & Playing on other
DVD components
To play your DVD on other DVD components, fi nalising
may be necessary. First, fi nish all editing and recording
operations, then fi nalise the disc.
When using a DVD-RW disc in VR Mode
DVD discs recorded in VR mode can only be played
back in DVD recorders, not players.
When using a DVD-RW disc in Video Mode
The disc should be fi nalised fi rst to enable playback on
anything other than this HDD & DVD RECORDER. No
more editing or recording can be made on the disc
once it has been fi nalised.
To enable recording on the disc again, the disc must
be unfi nalised.
When using a DVD±R disc
You should fi nalise the disc to play it on a component
other than this HDD & DVD RECORDER. You cannot
edit or record on the disc once it has been fi nalised.
M

You can fi nalise the disc automatically using
EZ Record function. (See page 31)
English - 12