Remote Control Unit - Samsung DVD-HR753 Instruction Manual

Remote Control Unit

The remote control doesn't work.
Point the remote control at the remote control
Checkpoint 1
sensor on your HDD & DVD RECORDER.
Allow for proper distance. Remove obstacles
between your HDD & DVD RECORDER and
the remote control.
Check whether the batteries are drained.
Checkpoint 2
Checkpoint 3 Check the TV/DVD selection button setting.
Checkpoint 4 Check whether TV control button is selected
or not.
Other
I forgot my password for parental supervision.
Checkpoint 1 Press and hold the PROG (
the front panel of the Recorder for more than
5 seconds with no disc in the unit. All settings
including the password will revert to the
factory settings. Do not use this unless
absolutely necessary.
(Note that this function is possible only when
no disc is inserted.)
Is it possible to change a subtitle and an audio
signal on a recorded disc?
Checkpoint 1 A recorded disc is played with only the subtitle
and the audio signal which were selected
during recording.
Other problems.
Read the table of contents and then fi nd and
Checkpoint 1
read the section describing your problem,
follow the instructions given.
Plug your HDD &DVD RECORDER off and
Checkpoint 2
on.
Checkpoint 3 If the problem still persists, contact a nearby
Samsung service centre.
) buttons on
English - 101