Timer Recording - Samsung DVD-HR753 Instruction Manual

Video
The disc revolves, but no image or bad quality
images is displayed.
Be sure that the Video Setting is
Checkpoint 1
properly set. (See pages 34~37)
Checkpoint 2 Check whether there is damage to or any
foreign material on your disc.
Some low quality discs may not play properly.
Checkpoint 3
Checkpoint 4 If scenes change from dark to bright
suddenly, the screen may shake
vertically temporarily, but this is not a fault.
Sound
No sound.
Checkpoint 1 Are you watching a programme in slow or skip
mode?
If you are playing a programme at a speed
other than normal speed, sound will not be
heard. (Except for forward search (X 2) in
disc.)
Checkpoint 2 Check the connections and settings. (See
pages 21~22, 32~33)
Check whether the disc is damaged. Clean
Checkpoint 3
the disc, if necessary.
Checkpoint 4 Check whether the disc is inserted
correctly with the label facing up.
No audio output.
Checkpoint 1 Check whether you have selected the correct
digital output options in the Audio Output
Options menu.
(See pages 32~33)

Timer Recording

Timer lamp fl ickers.
Check there is enough space in the disc or
Checkpoint 1
HDD for recording.
Checkpoint 2 Check whether the current disc is recordable
or not.
Make sure to check before the start time of
recording.
Timer recording does not work properly.
Checkpoint 1 Re-check the recording time and the end time
settings again.
Recording will be cancelled if the power is
Checkpoint 2
interrupted due to a power failure or another
similar reason while recording.
HDMI
No HDMI output.
Checkpoint 1 Check whether the mode is stop mode or not.
You can switch HDMI mode in stop mode.
Checkpoint 2 Check the Video output is HDMI enabled.
Checkpoint 3 Check the connection between the TV and
the HDMI jack of the HDD & DVD
RECORDER.
Checkpoint 4 See if your TV supports HDMI.
Abnormal HDMI output screen.
If snow noise appears on the screen, it means
Checkpoint 1
that TV does not support HDCP (High-
bandwidth Digital Content Protection).
HDMI output Jitter.
Check your TV system setup correctly.
Checkpoint 1
Checkpoint 2 Please refer to the user's manual of your TV.
English - 100