* Some of the contents in this manual may differ from your phone, depending on the software installed or your service provider. World Wide Web http://www.samsungmobile.com Printed in Korea Code No.: GH68-05553A English. 09/2004. Rev. 1.0...
Contents Phonebook menu ... 57 Find name (Phonebook 1.1) ... 57 Add entry (Phonebook 1.2) ... 60 Speed-dial list (Phonebook 1.3)... 61 Copy all to phone (Phonebook 1.4) ... 63 Delete all (Phonebook 1.5)... 64 Own number (Phonebook 2.1)... 64 Group setting (Phonebook 2.2)...
Important safety precautions Read these guidelines before using your wireless phone. Failure to comply with them may be dangerous or illegal. Road safety at all times Do not use a hand-held phone while driving; park the vehicle first. Switching off when refuelling Do not use the phone at a refuelling point (service station) or near fuels or chemicals.
Keep the phone and all its parts including accessories out of the reach of small children. Accessories and batteries Use only Samsung-approved accessories. Use of any unauthorised accessories could damage your phone and may be dangerous. Use only Samsung-approved batteries and recharge your battery only with Samsung-approved chargers.
Phone Battery In addition, you can obtain the following accessories for your phone from your local Samsung dealer: • Advanced handsfree car kit • Simple handsfree car kit • PC data link kit Note: This items supplied with your phone and available accessories may be different, depending on your country or service provider.
Your phone Phone layout The following illustrations show the main elements of your phone: Open view Folder Soft key (left) Headset jack Volume keys Dial/Menu confirmation key Cancel/Back/ Correction key Special function keys Charger connector Earpiece Main display WAP browser Navigation keys (Up/Down/Left/ Right)
Closed view Key(s) Description Perform the functions indicated by the text above them, on the bottom line of the display. (soft keys) In menu mode, scroll through the menu options and the Phonebook memory. In idle mode, the Left key accesses the new SMS message writing screen (Menu 5.1.1), the Right key accesses the incoming call melody setting menu...
Your phone Key(s) Description Initiates or answers a call. In idle mode, accesses the call log list. In menu mode, selects a menu function or stores information that you have entered, such as a name in the phone or SIM memory. Deletes characters from the display.
Your phone Key(s) Description Used for various purposes in different functions. When pressed and held while entering a phone number, the key enters a pause. When pressed and held in idle mode, the key enters or exits quiet mode. (on the left side of the phone) During a call, adjusts the earpiece volume.
Your phone Displays Main display The display has three areas: Menu Phonebook Area First line Middle Last line Icons Text and graphic area Soft key Indications Description Displays various icons. See page 15. Display messages, instructions, and any information that you enter, such as a number to be dialled.
Your phone Icons Icon Description Shows the received signal strength. The more bars, the stronger the signal. Appears when a call is in progress. When your SIM card supports ALS (Alternate Line Service), this icon may appear with the number 1, 2, or both. For example , or Appears when you are out of a service...
Your phone Icon Description (continued) Appears when you set the alarm(s) to ring at a specified time. Appears when the Call diverting feature is activated. When your SIM card supports ALS (Alternate Line Service), this icon may appears with the number 1, 2, or both.
Your phone folder, the backlight illuminates. It turns off if no key is pressed within a given period of time, depending on the Backlight option settings. See page 154 for further details. Dim mode If no key is pressed for a given period of time which you can set in the Backlight menu option (Menu 9.1.4), the backlight dims to save power.
Your phone Service light The service light is on the folder. It flashes when services are available on the phone. To activate or deactivate the service light, set the Service light menu (Menu 9.1.6). See page 155. Service light Camera The camera embedded in your phone allows you to take a picture of people or events while on the move.
Your phone Built-in antenna Your phone has a built-in antenna. As with other mobile radio transmitting equipment, do not touch the antenna unnecessarily when the phone is switched on. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than needed.
Getting started Inserting/Removing the SIM card When you subscribe to a cellular network, you are provided with a SIM card loaded with your subscription details, such as your PIN, any optional services available, and so on. • Keep all SIM cards out of the reach of small children.
Your phone is powered by a rechargeable Li-ion battery. Use only approved batteries and chargers. Ask your local Samsung dealer for further details. Note: You must fully charge the battery before using your phone for the first time. A discharged standard battery is fully recharged in approximately 130 minutes.
Getting started 2. Press the battery against the back of the phone until it clicks into place. Removing the battery 1. Switch off the phone by pressing and holding the key. 2. To remove the battery, pull the battery catch toward the top of the phone and hold it in that position.
Charging the battery by using the travel adapter Note: The phone can be used while the battery is being charged, but this causes the battery to charge more slowly. 1. Plug the travel adapter connecter into the jack at the bottom of the phone. Check that the arrow on the connector is facing up, as is the phone.
Getting started 3. When charging is finished and the ‘Fully charged’ message is displayed, disconnect the adapter from the power outlet and from the phone by pressing the grey tabs on both sides of the connector and pulling the connector out. Low Battery Indicator When the battery is weak and only a few minutes of talk time remain, the battery sensor informs you in...
Switching the phone on or off To switch the phone on: 1. Hold down the switches on. 2. If the phone asks for a PIN, enter the PIN and press the OK soft key. For further details, see page 167. The phone searches your network and the current date and time appear on the display.
Getting started Selecting functions and options Your phone offers a set of functions that allows you to customise your phone. These functions are arranged in menus and sub-menus, accessed via the two soft keys marked and sub-menu allows you to view and alter the settings of a particular function.
To view various functions/options available or select the one you want: 1. Press the appropriate soft key. 2. To select the: • function displayed • option highlighted view the next function or highlight the next option on a list move back to the previous function or option on a list move back up one level...
Call functions Making a call Using the number keypad When the idle screen is displayed, enter the area code and phone number, and press the Note: If you have set the Auto redial option (Menu 9.5) to On, the number will be redialled automatically up to ten times if the person you called does not answer or the line is busy.
Making an international call 1. Press and hold the 0 key for the international prefix. The + character appears. 2. Enter the country code, area code, and phone number and press the Making a call from Phonebook You can store the names and phone numbers you call regularly in the SIM card and the phone’s memory, which are jointly called Phonebook.
Call functions 3. To dial the number, press the To view each call record separately, see ‘Call records’ on page 68. Viewing missed calls If you have a subscription that includes Caller Line Identification (CLI) and you are unable to answer a call, you can find out who was calling you so that you can call the person back.
Call functions Speed-dialling from Phonebook Once you have stored numbers in the Phonebook, you can dial a number simply by pressing one or two keys. For further details, see page 61. Ending a call When you want to finish your call, briefly press the key or close the folder.
Call functions Adjusting the volume During a call, if you wish to adjust the earpiece volume, use the volume keys on the left side of the phone. When you hear a sound, such as a ringtone, you can also adjust the earpiece volume. However, the volume adjustment will not be permanent.
Accessing options during a call Your phone provides a number of control functions that you can use during a call. Using the loudspeaker You can speak and listen to the phone from a short distance without holding the phone to your ear. Turn on / off the loudspeaker 1.
Call functions Note: You cannot activate Voiceclarity when you use the loudspeaker or the handsfree car kit. Putting a call on hold You can place a call on hold whenever you want. You can make another call while you have a call in progress if this service is supported by your network.
2. When Unmute highlights, press the Select soft key. The Mute icon disappears and your correspondent can once again hear you. Muting/Sending key tones You can turn the key tones off or on during a call. When the Mute keys option is selected, your phone does not transmit key tones.
Call functions Note: You can also scroll through Phonebook from the beginning, by pressing the Up or Down key. 5. To view the highlighted entry, press the OK soft key. For further details about the Phonebook feature, see page 57. Sending DTMF tones You can send the DTMF (Dual Tone Multi-Frequency) tones of the number on the display during a call.
3. To read a received message, select the Inbox option, and then scroll to the message that you want to read. To write a new message, select the Create option. 4. Press the Select soft key. For further details about the SMS feature, see page 85.
Call functions 2. Press the The first call is automatically put on hold. Or alternatively: 1. Put the current call on hold by pressing the option soft key and the Hold option. 2. Make the second call in the normal way. To switch between the two calls, simply press the option softkey and the Swap option.
3. To end the call on hold, press the Options soft key and select the End held call option. To end the current call, press the The call on hold is automatically reconnected to you. Transferring a call You can transfer the current call to the call on hold if this service is supported by the network, so that the callers can talk to each other.
Call functions 4. To add a new person to the multi-party call, call the person in the normal way. Then press the Options soft key and select the Join option. Press the Select soft key. You can add incoming callers by answering the call and selecting the Join option.
3. To return to the multi-party call, press the Options soft key and select the Join option. 4. Press the Select soft key. All of the multi-party call participants can now hear each other. Removing one participant 1. Press the Options soft key and select the Remove option.
Entering text There are many situations in which you need to enter text, such as when storing a name in Phonebook, writing a message, creating your personal greeting, or scheduling events on your calendar. You are provided with the following text input modes: •...
Changing the text input mode When you are in a field that allows characters to be entered, you will see the text input mode indicator at the bottom of the display. Example: Entering a name in the Phonebook Enter name To change to another text input mode: 1.
Entering text Quickly changing the text input mode To switch between the Number and previous mode Symbol and previous mode ABC and T9 mode Using ABC mode When inputting words in ABC mode, press the key labelled with the required letter: - Once for the first letter - Twice for the second letter - And so on...
List of the characters available characters in the order displayed Changing the case To change the case of the next letter(s) that you enter, press the • Lower Case (no indicator) • Initial Capital ( • Capital Lock ( Inserting a space To insert a space between words, press the ‘...
Entering text Scrolling To move the cursor to the left, right, up, or down within the text, press the navigation keys. Clearing letters and words To clear the letter to the left of the cursor, press the C key. You can clear all of the letters on the display by pressing and holding the C key.
Example: Both “of” and “me” have the sequence of 6 and 3. The phone displays the most commonly used choice first. 4. Insert a space between words by pressing the key. 5. Enter the next word. If Spell appears above the left soft key while you are entering text, the word does not exist in the T9 dictionary.
Entering text Changing the case To change the case of the next letter(s) that you enter, press the key. There are three cases: • Lower Case (no indicator) • Initial Capital ( • Capital Lock ( Inserting a space To insert a space between words, press the key.
Using symbolic mode Symbolic mode enables you to enter symbols in your text. display more symbols enter a symbol return to the previous text input mode with entered symbol(s) return to the previous text input mode without entered symbol(s) Using number mode Number mode enables you to enter numbers in your text.
Using the menus The phone offers a range of functions that allows you to tailor the phone to your needs. These functions are arranged in menus and sub-menus. Accessing a menu function The menus and sub-menus can be accessed by pressing the Menu or Phonebook soft key in idle mode, then scrolling with the navigation keys.
You can also access the menus and sub-menus by quickly entering the corresponding menu number. Example: Accessing the Voice mail menu option, press the Menu soft key and 5, 5 in idle mode. List of menu functions Various menus let you check or change your phone settings.
Using the menus Main menu 1. SIM-AT (SIM Application Toolkit) (see page 67) 2. Call records 2.1 Missed calls 2.2 Received calls 2.3 Dialled calls 2.4 Delete all 2.5 Call time 2.5.1 Last call time 2.5.2 Total sent 2.5.3 Total received 2.5.4 Reset timers 6.
3.3 Call waiting 3.4 Network selection 3.5 Caller ID 3.6 Active line 4. Sound settings 4.1 Incoming calls 4.1.1 Default melodies 4.1.2 My sounds 4.1.3 Ring volume 4.1.4 Alert type 4.2 Messages 4.1 Short messages 4.2 Multimedia messages 4.3 Power on/off 4.4 Connection tone 4.5 Key tone 4.6 Minute minder...
Using the menus 5.4 Preset messages 5.5 Voice mail 5.5.1 Connect to voice mail 5.5.2 Voice server number 5.6 Broadcast 5.6.1 Read 5.6.2 Receive 5.6.3 Channel 5.6.4 Language 5.7 Settings 5.7.1 Short messages 5.7.2 Multimedia messages 5.8 Memory status 5.8.1 Short messages 5.8.2 Multimedia messages 6.
7. Organiser 7.1 New memo 7.2 Calendar 7.3 To do list 7.4 Clock 7.4.1 Set time 7.4.2 Set date 7.4.3 Set world time 7.4.4 Set format 7.5 Alarm 7.6 Voice recorder 7.7 Calculator 7.8 Conversion 7.8.1 Currency 7.8.2 Length 7.8.3 Weight 7.8.4 Volume 7.8.5 Area 7.8.6 Temperature...
Phonebook menu Phonebook offers the following features: • Phonebook: allows you to find, create, and set up the speed-dialling feature, and manage Phonebook. • Management: allows you to create, or remove your own number, set up caller groups and check memory status.
Phonebook menu Editing phone memory entries While looking at a Phonebook entry, scroll to the category that you want to edit by pressing the Left or Right key. The following categories are available and you can edit the information of each category by pressing the Options soft key.
Phonebook menu Editing SIM memory entries To change SIM memory entry information, press the Options soft key. The following options are available: Edit number This option allows you to change the number. You can also add a new number if none has been stored for the selected entry.
Phonebook menu Add entry (Phonebook 1.2) You can store phone numbers and the corresponding names in the memory of your SIM card. In addition, you can store up to 1000 names in the phone’s memory, and each name can be associated with up to five numbers.
For information about how to enter characters, see page 42. 6. When you are satisfied, press the OK soft key. 7. If you select Phone in step 3, go to step 8. If you select SIM in step 3, enter the location number and press the OK soft key.
Phonebook menu 3. Enter a phone number and press the OK soft key. Or, To retrieve a number from your Phonebook, press the Phonebook soft key. Select an entry from the list and press the OK soft key. Press the OK soft key to save it. 4.
Dialling a number stored in the SIM card Once you have stored phone numbers in your SIM card, you can dial them easily whenever required. To dial a number stored in the SIM card: 1. Enter the number of the SIM card location where the number you want to dial is stored.
Phonebook menu Delete all (Phonebook 1.5) You can delete Phonebook entries selectively depending on their memory location, or all entries at once. 1. Scroll to a desired memory selection and place a check mark ahead of it by pressing the Select soft key.
4. To assign a name, press the Down key to move to Change name and press the Select soft key. 5. Enter a name and press the OK soft key. 6. When you have finished, press the key to exit. To remove one of your numbers: 1.
Phonebook menu • Change name: allows you to change the name of the group; for further details about how to enter characters, see page 42. • View image: shows the image to display when a call comes in from a member of the group.
SIM-AT (SIM Applica- tion Toolkit) If you use a SAT card that provides additional services, the SAT menu displays. For further details, see your SIM card instructions. Shown only if it is supported by your SIM card.
Call records Via this menu, you can view the: • calls you missed, received, or dialled. • cost of your calls. • length of your calls. Note: You can access the phone numbers that are in the three types of call records by pressing the key in idle mode.
Call records By pressing the Options soft key, you can also: • delete the current call record from the list. • delete all of the calls. • paste the number into Phonebook. Dialled calls (Menu 2.3) This option lets you view the last 20 dialled numbers.
Call records Call time (Menu 2.5) This option lets you view the timers for calls made and received. Notes: • If your SIM card supports ALS (Alternate Line Service), you must first select the appropriate line. • The actual time invoiced for calls by your service provider may vary, depending on network features, rounding-off for billing purposes, and other reasons.
Call records The following options are available: Last call cost: cost of the last call made. Total cost: total cost of all calls made since the cost counter was last reset. If the total cost exceeds the maximum cost set via the Set max cost option, you can not make any calls until you reset the counter.
Network services These menu functions are network services. Please contact your service provider to check their availability and subscribe to them, if you wish. Call diverting Note: Call divert options may be different depending on your SIM card. Those not supported by your network operator may not be shown on your phone.
• Data calls only (not available when line 2 is in use) Example: You can divert voice calls to your colleague if you are already using the phone. Setting call diverting options 1. Select the type of call diverting by pressing the Up or Down key and then press the Select soft key.
Network services 1. Select the call diverting option to be deactivated. 2. Select the type of calls to which this option applies. 3. Press the Remove soft key. The phone sends your settings to the network and displays the network’s acknowledgement. You can also deactivate all call diverting options by selecting the Cancel all option.
You can specify individual call barring options for each of the following call types: • Voice calls only • Data calls only (not available when line 2 is in use) Setting call barring options 1. Select the type of call barring by pressing the Up or Down key and then press the Select soft key.
Network services 2. Select the type of calls to which this option applies. 3. Press the Deactivate soft key. 4. Enter the call barring password supplied by your service provider. The phone sends your settings to the network and displays the network’s acknowledgement. You can also deactivate all call barring options by selecting the Cancel all option.
Call waiting This network service informs you when someone is trying to reach you while you are on another call. You can specify individual call waiting options for each of the following call types: • Voice calls only • Data calls only (not available when line 2 is in use) Activating the call waiting feature 1.
Network services Network selection The Network selection feature enables you to manually select the network used when roaming outside your home area or to let the phone automatically select the roaming network. Note: You can select a network other than your home network only if it has a valid roaming agreement with your home network.
Network services Caller ID (Menu 3.5) You can prevent your phone number from being displayed on the phone of the person being called. Note: Some networks do not allow the user to change this setting. The following options are available: Default: the default setting provided by the network is used.
Sound settings You can use the Sound settings feature to customise various settings, such as the: • ringtone, volume, and type for incoming calls or messages. • sounds made when your call is connected or when you press a key. •...
Sound settings Alert type: lets you specify how you are informed of incoming calls. Melody: the phone plays the melody selected via the Melody option. See above. Vibration: the phone vibrates, but does not ring. Vibration then melody: the phone first vibrates and then plays the melody selected via the Melody option.
Sound settings Repetition: allows you to specify how often the phone informs you of a new message. You can choose either Once or Periodic. Power on/off (Menu 4.3) This option allows you to select the melody that the phone sounds when you switch it on or off. You can choose either Basic or Cheerful.
Sound settings Off: the keys do not make any sound. Tone: each key, when pressed, makes a different sound. Beep: each key, when pressed, makes the same sound. Piano / Drum: each key, when pressed, makes the sound of a piano or a drum, depending on which you choose.
Sound settings Alerts on call (Menu 4.8) This menu allows you to choose whether or not the phone informs you when you receive a new message or when an alarm goes off during a call. The following options are available: Off: the phone doesn’t alert you to incoming messages or alarms.
Messages This menu allows you to create, send, read, and save messages with the Short Message Service (SMS: text messages), Enhanced Message Service (EMS: messages including simple images, animations, or melodies) and Multimedia Message Service (MMS: messages supporting the presentation of various media types, such as full colour images, polyphonic ring tones).
Messages To read the new message(s) immediately, press the View soft key. The list of messages appears. Note: To clear the new message notification on the display, press the have missed calls, voice mails, short messages or multimedia messages, and multi CBs, the right soft key indication changes in the following order: Missed, Connect, View, CB, and Phonebook.
messages you can create, and the font style you set in the Text option. Note: For further information about how to enter characters, see page 42. 2. While entering your message, press the Options soft key to use the following options. •...
Messages 4. Enter a destination number on the Address screen. You can search for a number in Phonebook by pressing the Phonebook soft key. Note: To clear part or all of your input, press or press and hold the C key. If or when there is no input, you can press and hold the C key to move to the previous screen.
When the Inbox menu is selected, the list of messages received displays with the: • sender’s phone number, or name if stored in Phonebook. • message status; message to read or message. To view a message, scroll to it and press the Select soft key.
Messages Edit: allows you to edit the message. Extract media: you can save media (except predefined EMS animations and sounds) from the message into the Media box. You can then use these items when writing future messages. Transfer: allows you to transfer the message from the SIM card to the phone’s memory or vice versa.
You can choose the following options by pressing the Options soft key: Delete: allows you to delete the message. Cut address: extracts phone numbers, email addresses, or URL addresses in the text, so that you can call the number or send a message to the number or save it in your Phonebook.
Messages Multimedia messages Multimedia Message Service (MMS) is a messaging service very similar to Short Message Service (SMS). It provides automatic and immediate delivery of personal multimedia messages from phone to phone or from phone to e-mail. In addition to the familiar text content of text messages, multimedia messages can contain images, graphics, voice, and sounds.
To read the new message in idle mode, press the View soft key. You will see the Inbox contents. Select a message to view it. Notes: • When you set Message reception (see page 109) to Automatic, you cannot enter the Downloads menu (Menu 6.3.1) and also cannot access WAP sites while retrieving a new message.
Messages messages. You can do this by using the Delete option in Inbox, Outbox, Draft, or My folder, or by using the Delete all option; for further details, see page 103. Notes: • You can receive up to 150 messages. •...
Item How to add Picture To add a new picture: 1. Select the Create new option. 2. Take a photo using the camera feature. For details about the camera feature, see page 143. 3. Select a picture you want to add. The picture is displayed.
Messages Item How to add Sound To add a sound from Media box: (Con’t) 1. Select one of the sound storage 2. Select the sound you want to add. 3. Press the Select soft key to add it. 1. Enter a new message. Or you can Message To enter a preset message;...
• Add page: allows you to add up to 10 pages. You can move to each page using the Left or Right key on the message screen. • Page timing: allows you to set how long one page of the message will display to the recipient before scrolling automatically to the next page.
Messages If the entry is not empty, you can choose one of the following. Select: Edit address: to edit the selected address. Delete address: to delete the selected address. Note: To clear part or all of your input, press or press and hold the C key, If there is no input displayed, press and hold the C key to move to the previous screen.
Note: There are several different message status icons ( priority assigned to the message by the sender (see page 108). To view a message, scroll to it and press the Select soft key. To scroll through the message contents, press the Up or Down key.
Messages Cut address: extracts phone numbers, email addresses, or URL addresses in the text, so that you can call the number, or send a message to the address, or save it in your Phonebook. Properties: shows detailed information about the message.
Messages message appears. In the message, you can cancel transmission by pressing the Yes soft key. To resend a message that failed or was cancelled in transmission, scroll through and select the message by pressing the Up or Down key, and press the Select soft key.
Messages You can choose the following options by pressing the Opt. soft key: Send: sends the message. Replay: replays the message. Delete: deletes the message. Properties: shows you detailed information about the message. My folder (Menu 5.2.5) You can move messages stored in Inbox or Outbox to My folder by using the Move to My folder option.
Properties: shows you detailed information about the message. Delete all (Menu 5.2.6) This menu option allows you to delete all of the messages in each message box separately. You can also delete all of your messages at one time. 1. Scroll to a message box and place a check mark next to it by pressing the Select soft key.
Messages Setting: This option allows you to set the push message receiving options. Always: allow all push messages. Never: reject all push messages. Optional: allows only push messages whose setting matches the number set in this option. The preset number is that of the SMS service centre. You can edit the number.
Voice mail (Menu 5.5) When you receive a voice mail, your phone displays icon and you hear an alert. Connect to voice mail • In idle mode, when you receive a new voice mail, press the Connect soft key to access your voice mail server and follow the instructions provided.
Messages Broadcast (Menu 5.6) This network service allows you to receive text messages on various topics, such as the weather or traffic. Messages are displayed immediately as they are received, provided that: • the phone is in idle mode. • the Receive option (Menu 5.6.2) is set to On. •...
Messages Delete: delete this message. Delete All: delete all message on the list. Receive: allows you to turn the reception of broadcast messages on or off. Channel: a check mark inside the All check box indicates that the channel is enabled. To enable or disable this channel, press the Select soft key, then select Enable or Disable.
Messages Message type: allows you to set the type of messages you want to receive, either Text, Fax, Voice, ERMES, X400, or E-Mail. The network can convert the messages into the selected format. Reply path: allows the recipient of your SMS message to send you a reply via your message centre, if the service is provided by the network.
Messages Validity period: allows you to set the length of time your messages are stored at the message centre while attempts are made to deliver them. Delivery after: you can set the delay time before the phone sends your messages. Address hiding: when this option is set to On, your phone number does not display on the recipient’s phone.
Messages MMS profiles: in this menu, you can configure MMS profile settings that are required when you send or receive multimedia messages. Current profile: allows you to select the profile to be used with the current message. Profile setting: allows you to set up to five profiles. •...
• Bearer: select the bearer to be used for each type of network access. - GPRS only: only functions on a GPRS network. - GSM only: only functions on a GSM network. Memory status You can check the memory status for messages. Short messages You can check how many messages are stored on the SIM card and phone’s memory.
Fun box The Fun box menu contains several amusement options: • WWW Services • Media box • JAVA world WWW services (Menu 6.1) Your phone comes equipped with a WAP (Wireless Application Protocol) Browser, making it possible for you to access the Wireless Web. Each time you start the WAP Browser, the phone connects to the Wireless Web and the service indicator icon (...
Note: To quickly launch the WAP browser from idle mode, press the To scroll through a displayed screen, use the Up and Down keys. To exit the browser, press the time. The phone returns to idle mode. Navigating the wap browser scroll through and select browser items...
Bookmark: allows you to use the Bookmark menu option. For details, see page 115. Messages: allows you to read or write an SMS message. For details, see page 85. Media box: allows you to use your Media box. For details, see page 118. Answering a call during a WAP connection You can receive an incoming call while you are using the WAP browser.
Fun box Go: allows you to access the site directly. Edit: allows you to change the name and URL address of the bookmark. Delete: allows you to delete the bookmark. Go to URL (Menu 6.1.3) This menu option allows you to manually enter the URL address of the Web site that you wish to access.
Fun box Gateway: enter the IP Address and IP Port Data call type: select a network connection type: ISDN or Analogue. Dial number: enter the PPP server phone number. Login ID: enter the PPP server login ID. Password: enter the PPP server password. GPRS setting: you can change the proxy settings for the GPRS network.
Fun box Current proxy (Menu 6.1.6) This menu option allows you to activate one of the proxies you set up to use the WAP connection. Media box (Menu 6.2) This menu option stores various media items from outside sources, such as WAP sites, or multimedia messages you have received.
Fun box Protection: allows you to protect it from deletion or not. Properties: allows you to view the detailed information about the photo. Images (Menu 6.2.2) This option allows you to view images extracted from EMS or MMS messages, downloaded from WAP sites, or from EasyStudio PC software.
Fun box My sounds: allow you to listen to various melodies. When you select a sound, press the Options soft key to send, rename, delete, set as a ringtone (only in My sounds), or view its properties. Delete all (Menu 6.2.4) This option deletes all photos, images, and sounds from Media box.
Sounds 1. Scroll to a sound box and place a check mark next to it by pressing the Select soft key. Selecting All places check marks in all of the boxes. 2. If necessary, repeat step 1 to check other box. 3.
Fun box Downloads A list of Java games is displayed. Two MIDlets (Java games) have been pre-loaded on your phone. If the Jave games list is empty, a pop-up message is displayed inviting you to download a new game. To add MIDlets to the list, download them from the Web.
Fun box Configuration: allows you to turn the sound or vibration on or off, and to select the speed of the game from 1 to 5. Quit: quits the game and returns to the downloads menu screen. Playing a game Move the character along the street using the navigation key.
Fun box Level 3: Icicle storm, double powered snowball attack on all enemies. Enemies’ attack accuracy is decreased for 10 seconds. BubbleSmile BubbleSmile is an arcade puzzle game. Accessing a game After loading the game, you will see the following options.
Fun box can rotate the bubbles within the band to make them line up within the matrix, to match colours. You can also move the band to surround three different bubbles. When the game ends, if your score was within the top three, it will appear on the display.
Organiser The Organiser feature enables you to: • view the calendar and/or write a memo or make a to do list. • set the current date and time, and find out what time it is in various cities around the world. •...
• Anniversary: anniversaries to be remembered, such as wedding anniversaries, birthdays, or other special days. Note: You can save up to 25 items in each category, giving you a total capacity of 100 memos. 3. Scroll to a date on the calendar by pressing the navigation keys.
Organiser 10. After you have finished creating your memo, you can choose from the following options by pressing the Options soft key: • Add: allows you to create a new memo. • Delete: allows you to delete the memo. • Edit: allows you to edit the memo. •...
The following options are available when you press the Options soft key on the Calendar display: Add memo: allows you to create a new memo on the day. Go to date: allows you to enter a particular date and then schedule an event on that date. View all: shows all of the events that you have scheduled.
Organiser Viewing your calendar memos A date that has a memo associated with it is highlighted in a red box. If you select a date on which events have already been scheduled, the number of memos of each type is shown at the bottom of the calendar.
To create a new memo of the To do list type: 1. Write the memo and press the OK soft key. For more information about how to enter characters, see page 42. 2. Scroll to a date on the calendar, referring to page 128, and press the Select soft key.
Organiser Clock (Menu 7.4) This option allows you to change the current time and date displayed. You can also check the current time for Greenwich Mean Time (GMT) and 22 major cities around the world. The following options are available: Set time: allows you to enter the current time.
2. Press the Set soft key. 3. To update the current date/time with this new setting indicate that the time zone is currently using the daylight saving time indicate that the time zone is no longer using the daylight saving time 4.
Organiser icon means that no alarm is currently set. The already been set. 2. Press the Select soft key. 3. Press the Options soft key. 4. Scroll to an option by pressing the Up or Down key and press the Select soft key. Change the setting, as needed.
Note: When quiet mode has been activated, Alarms 1 and 2 will not sound. However, Morning call will sound regardless of whether or not quiet mode has been activated. To set the alarm to ring even if your phone is switched off: 1.
Organiser Voice recorder You can record voice memos. After recording, you can send a memo to other people via Multimedia Message Service. Record (Menu 7.6.1) This menu allows you to record a new voice memo. 1. To start recording, select Select key.
Organiser Voices (Menu 7.6.2) This option shows you the list of voice memos you have recorded. Scroll to the voice memo which you want and press the Select soft key. The voice memo will play back automatically. While playing, you can stop playing, pause, rewind, or forward it by selecting the , or .
Organiser Normal: you can record your voice memo until you fill out the phone’s memory capacity. Limit size (for MMS): you can record your voice memo upto 2 minutes which enables you to attach the recorded voice memo to multimedia messages. Volume: allows you to adjust the voice memo recording volume.
appropriate operation: + (add), - (subtract), (multiply), / (divide), % (remainder), (, or ). 3. Enter the second figure. 4. Repeat steps 2 and 3, if necessary. 5. Press the Equals soft key to view the result. The result appears in the Answer box. Note: The result is rounded off to six decimal places.
Organiser 4. Select the unit of measurement to which you want the value converted by pressing the Left or Right key. 5. Press the OK soft key or the result. The result appears in the Answer box. 6. When you have finished, press the key to exit.
Timer (Menu 7.9) Using the Timer feature, you can set the phone to sound an alarm after a specified period of time has elapsed. 1. Press the Set soft key. 2. Enter the length of time you want to count down hours:minutes and press the OK soft key.
Organiser Stopwatch The stopwatch can be used to measure times for various sports. Up to four intervals (such as lap times) can be measured. The precision of the stopwatch is one one- hundredth of a second. The maximum measurement time is 10 hours. 1.
Camera Using the camera module embedded in your phone, you can take pictures of people or events while on the move. Additionally, you can send photos to other people in a picture message or as an e-mail attachment. The camera produces JPEG pictures. CAUTIONS: •...
Camera The icons on the top line of the display indicate the size, quality, flash setting, and current mode (shown if you have selected the multi-shot mode or night mode). 2. Adjust the image by aiming the camera at the subject.
For more information about these functions, see “Using the camera options” on page 146. 3. Press the the right side of the phone to take a picture. The picture is automatically saved in the My photos folder(see page 149). 4. To use the options delete the picture file return to the capture...
Camera Wallpaper: allows you to set the image as wallpaper. Caller ID: allows you to set it as a caller ID. Protection: allows you to protect the picture from deletion or not. Properties: this option shows you information about the picture, such as name, size, date, resolution, protection type, and format.
Camera Frame: this option allows you to set a frame around the picture. Press the navigation key to find the frame format you want to use. You can preview the image with the frame format by using the Preview soft key. The Mobile (128*120) size will be set by default.
Camera Shutter sound: allows you to select a sound when you press the shutter release, the the Camera ( Note: This sound setting is not applied in multi-shot mode. Flash light: allows you to set the camera to flash automatically or not. •...
4. To review the picture, open the folder. You can delete the picture by pressing the Options soft key and select the Delete. To return to the camera mode, pressing the Preview soft key. To exit the camera mode, open the folder and press the My photos (Menu 8.2)
Camera My albums My Album allows you to store pictures in separate photo albums. Select one of albums. It shows the pictures saved in the album. For details about viewing your pictures and using them, see page 149. Delete all (Menu 8.4) You can delete all the photos saved in each category.
Camera Settings (Menu 8.5) This menu option allows you to change the camera feature’s default option settings. The following options are available: Photo size: sets the image size to VGA (640*480), QVGA (320*240), QQVGA (160*120), and Mobile (128*120). The selected image size displays on the capture screen.
Camera Memory status (Menu 8.6) Camera, Media box, and multimedia message boxes share a given amount of memory in your phone. The display shows the status of free and used memory. You can see the status of memory use in Camera, Media box, and multimedia message boxes by pressing the Left or Right key.
Phone settings Many different features of your phone can be customised to suit your preferences via the Phone settings menu. Display (Menu 9.1) You can change the background image and the colour of the display components, according to your preferences and needs. Wallpaper (Menu 9.1.1) This option allows you to change the background...
Phone settings Note: When you set the wallpaper image to Calendar, the Text position and Text style options are not applied. Front LCD (Menu 9.1.2) You can select a different type of clock to display on the front LCD. Skin (Menu 9.1.3) You can change the colour setting of the display components, such as soft key indication areas, or...
3. When you are satisfied, press the OK soft key to save the selection. Service light You can turn on or off the service display. Greeting message This menu option allows you to set a greeting message to be displayed briefly when the phone is switched on.
Phone settings Language (Menu 9.3) You can select a different language for the display text and text input modes. The following options are available: Text language: allows you to change the language of the display text, such as menus, options, or warning messages.
Phone settings Enable: you must enter the PIN each time the phone is switched on. To change your PIN, see the Change PIN menu option below. Change PIN (Menu 9.4.2) This feature allows you to change your current PIN to a new one, provided that the PIN Check feature is enabled.
Phone settings Change password (Menu 9.4.4) The Change password feature allows you to change your current phone password to a new one. You must enter the current password before you can specify a new one. The password is preset to “00000000” at the factory.
The following options are available: Disable: you can phone any number. Enable: you can only call phone numbers stored in Phonebook. You must enter your PIN2. Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu option is not displayed. To change your PIN2, see the Change PIN2 menu option below.
Phone settings Voiceclarity (Menu 9.6) Voiceclarity feature makes received sound louder and clearer during a call. It is useful when you are in a noisy place. For further details about the Voiceclartity feature, see page 33. Active folder (Menu 9.7) This menu allows you to set whether you can answer an incoming phone call by opening the folder, or not.
Anykey answer You can answer incoming calls by pressing almost any key on the phone. Off: you can only press to answer incoming calls. On: you can press any key, except incoming calls. Reset settings This menu option allows you to reset your phone to its default configuration.
Using ALS (Alternate Line Service) The ALS feature enables two lines to be associated with one SIM card. Consequently, you can make and receive calls on either line. If you subscribe to this network service, a few additional menu options enable you to set up this feature.
Using ALS (Alternate Line Service) Setting call diverting options You can set up call diverting via the Call diverting menu option. This service reroutes incoming calls on the line of your choice to a specified number. For further details, see page 72. Viewing call information You can view call times and last call cost information for each line.
Solving problems Before calling for service, perform the following simple checks for the problems listed. You may save the time and expense of an unnecessary service call. When you switch your phone on, one of the following messages appears: No SIM card Check that the SIM card is correctly installed.
“No service” displays • The network connection has been lost. You may be in a weak reception area (in a tunnel or surrounded by buildings). Move and try again. • You are trying to access an option for which you have not taken out a subscription with your service provider.
If the above guidelines do not help you to solve the problem, take a note of: • the model and serial numbers of your phone • your warranty details • a clear description of the problem Then contact your local dealer or Samsung after-sales service. ) to weak (...
Access codes There are several access codes that are used by your phone and its SIM card. These codes help you protect the phone against unauthorised use. Some access codes can be changed using the Security menu option. See page 156 for further details.
Access codes PIN2 The PIN2, supplied with some SIM cards, is required to access some functions, such as charging unit counters. These functions are only available if supported by your SIM card. If you key in an incorrect PIN2 three times in succession, you will have to key in the PUK2 and press the OK soft key to unlock the phone.
Access codes PUK2 The PUK2, supplied with some SIM cards, is required to change a blocked PIN2. If you key in an incorrect PUK2 ten times in succession, you cannot use the functions requiring the PIN2. Contact your service provider for a new card.
Health and safety information SAR certification information This phone meets European Union (EU) requirements concerning exposure to radio waves. Your mobile phone is a radio transmitter and receiver. It is designed and manufactured so as not to exceed the limits for exposure to radio-frequency (RF) energy, as recommended by the EU Council.
SAR tests are conducted using standard operating positions with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value.
Health and safety information • If left unused, a fully charged battery will discharge itself over time. • Use only Samsung-approved batteries and recharge your battery only with Samsung- approved chargers. When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for more than a week, since overcharging may shorten its life.
Health and safety information Road safety Your wireless phone gives you the powerful ability to communicate by voice, almost anywhere, anytime. But an important responsibility accompanies the benefits of wireless phones, one that every user must uphold. When driving a car, driving is your first responsibility.
Health and safety information Electronic devices Most modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone. Consult the manufacturer to discuss alternatives. Pacemakers Pacemaker manufacturers recommend that a minimum distance of 15 cm (6 inches) be maintained between a wireless phone and a...
Health and safety information Other medical devices If you use any other personal medical devices, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.
Health and safety information reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked.
2. Key in the emergency number for your present location (for example, 112 or any other official emergency number). Emergency numbers vary by location. 3. Press the If certain features are in use (call barring, for example), you may first need to deactivate those features before you can make an emergency call.
Health and safety information • For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including both installed or portable wireless equipment in the area over the air bag or in the air bag deployment area.
devices, damage batteries, and warp or melt certain plastics. • Do not store the phone in cold areas. When the phone warms up to its normal operating temperature, moisture can form inside the phone, which may damage the phone’s electronic circuit boards.
Glossary To help you understand the main technical terms and abbreviations used in this booklet and take full advantage of the features of your mobile phone, here are a few definitions. ALS (Alternate Line Service) Capability of associating two lines with one SIM card.
Glossary EMS (Enhanced Message Service) Network service sending and receiving messages that include images, sounds and/or animations to and from another user without having to speak to the correspondent. GPRS (General Packet Radio Service) New non-voice value-added service that allows information to be sent and received across a mobile telephone network.
Glossary e-mail. In addition to the text content of SMS, MMS messages can contain still images, voice or audio clips, and in the future, also video clips and presentation information. Multiparty calling Ability to establish a conference call involving up to five additional parties.
SIM (Subscriber Identification Module) Card containing a chip with all the information required to operate the phone (network and memory information, as well as the subscriber’s personal data). The SIM card fits into a small slot in the back of the phone and is protected by the battery.
Index ABC mode • 42, 44 Access codes • 167 Accessories • 9 Active folder • 160 Active line select • 79 service, use • 162 Alarm, set • 133 Alert type • 81 ALS • 162 Autopower alarm • 135 background image, set •...