Neo Chair CPSW Assembly Instruction

CPSW / CPS
ASSEMBLY
INSTRUCTION
Contents
Instructions
User Manual
Cautions
cs@hyggeinc.net
https://www.neochair.net
※Please Make sure all parts are included.
If not, email us cs@hyggeinc.net
BACK X1 SEAT X1 ARMREST X2
WHEEL X5 BASE X1
CYLINDER X1
Read the instructions carefully.
A
X4
(SEAT)
B
X4
(BACK)
C X4
(LOCKING)
CONTROL
MECHANISM X1
D
X4
(BOLT CAP)
E
X4
GAS LIFT ALLEN KEY X1
(WASHER)
Please follow the assembly steps.
Instructions
※NOTICE
Under-tighten each bolt
make sure bolt holes aligned and tighten!
TIPS!
Use packaging box
for easier assembly.
STEP 2 Top
1
.
B
BOLTS
Under-
tighten
If there is any problem, do not hesitate to contact us with e-mail below.
STEP 1 Bottom
2
.
1
.
Use base legs as support
aiming the hole. Press it strongly.
(Be careful the tip of the leg might be sharp. Residue on the
surface is from welding finishes, not a defect of the product.)
2
.
E
A
BOLTS
cs@hyggeinc.net