Alba YK30 Instruction Booklet

NAEDQ
INSTRUCTION BOOKLET
CAL. YK30, YK31
C H A R A C T E R I S T I C S
1. Time/calendar display: Hour, minute, second,
date, day of the week and month.
2. Automatic calendar adjustment: Calendar
adjusts automatically for odd and even months
except February of leap years.
3. Time indication: Changeover between 12-hour and
24-hour indications is possible.
4. Stopwatch: 24-hour stopwatch with 1/100 second
readout up to 40 minutes and with 1 second readout
after the first 40 minutes. Split time measurement
is available.
5. Alarm: The alarm rings at the designated hour and
minute with "beep, beep" for 30 seconds.
6. Hourly time signal: Can be set to ring every hour
on the hour with a single "beep".
7. Illuminating light: The light evenly illuminates
the display in the dark.
D I S P L AY A N D B U T T O N O P E R AT I O N
D a y i n d i c a t o r
H o u r l y t i m e
s i g n a l m a r k
E L
b u t t o n
A
H o u r
M i n u t e
Button A :• Selection of the display.
The selection is made in the following order:
T i m e / c a l e n d a r
S t o p w a t c h d i s p l a y
d i s p l a y
- - - - - - - - - - - - - - - - - - - - - - - - - - - -
A
- - - - - - - - - - - - - - - - - - - - - - - - - - - -
A
A
A
T i m e / c a l e n d a r
A l a r m s e t t i n g
s e t t i n g
Button B :• Calendar (month, date and day) display
in the time/calendar display.
• Start/stop in the stopwatch function.
• Selection of the digits to be adjusted in
the alarm setting function and the time/
calendar setting function.
Button C :• Alarm display in the time/calendar
display.
• Split/Split release/Reset in the stopwatch
function.
• Setting the digits in the alarm setting func-
tion and the time/calendar setting func-
tion.
• Stopping the alarm in any display.
Button B while keeping Button C pressed :
Engagement and disengagement of the
alarm and the hourly time signal.
Button C while keeping Button B pressed :
Changeover of the calendar (month and
date) display.
Buttons B & C :
Alarm test in the time/calendar display.
H O W T O S E T T H E T I M E / C A L E N D A R
T i m e / c a l e n d a r
s e t t i n g
i n d i c a t o r
1. Press Button A to activate the time/calendar setting
function. (The time/calendar setting indicator and
the second digits start flashing.)
2. Selection of the digits to be adjusted (flash-ing) is
made in the following order by pressing Button B.
Second
3. One digit (flashing) is advanced with each press of
Button C. (The digits except seconds are advanced
quickly by keeping Button C pressed.)
• Second setting
Press Button C in accordance with a time
signal. The seconds are reset to "00" and start
immediately.
When the seconds count any number from "30"
to "59" and Button C is pressed, one minute is
added and the seconds are immediately reset
to "00".
4. After all the adjustments are completed, press Button
A to return to the time/calendar display.
Note: When setting the hour digits, be sure to check
that the "A" (AM)/"P" (PM) mark is correctly
set.
H O W T O S E T T H E D U A L C A L E N D A R
D I S P L AY
1. Press Button B to show the calendar (month, date,
A l a r m m a r k
and day) display. The calendar display is shown
while Button B is kept pressed.
B
2. The month and the date change places with each
other with each press of Button C while keeping
C
Button B pressed.
D a y
M o n t h
S e c o n d
* In the 12-hour indication, "A" (AM)/"P" (PM) mark
is displayed. In the 24-hour indication, there is no
indication.
H O W T O S E T T H E A L A R M
A l a r m s e t t i n g
i n d i c a t o r
P r e s s
Button A
for 2 sec.
1. Press Button A for 2 seconds to activate the alarm
setting function. (The alarm setting indicator starts
flashing.)
2. Press Button B to activate the "Hour" or "Minute"
setting. The display changes in the following order
with each press of Button B.
H o u r s e t t i n g
3. One digit (flashing) is advanced with each press of
Button C. The digits are advanced quickly by
keeping Button C pressed.
4. After all the adjustments are completed, press Button
A to return to the time/calendar display.
(The display returns directly to the time/cal-
e n d a r d i s p l a y a n d n o t t o t h e t i m e / c a l e n d a r
setting.)
Note: When setting the hour digits, be sure to check
that the "A" (AM)/"P" (PM) mark is correctly
set.
H O W T O E N G A G E A N D D I S E N G A G E
T H E A L A R M A N D T H E H O U R LY T I M E
S I G N A L
1. Press Button C in the time/calendar display to show
the alarm display. The alarm display is shown while
Button C is kept pressed.
H o u r
B
C
A
Month
Minute Hour
Day D a t e
D a y
D a t e M o n t h
D a t e
B
C
B
C
A
" A " ( A M )
H o u r
M i n u t e
M i n u t e s e t t i n g
B
A l a r m d i s p l a y
B
C
" A " ( A M )
M i n u t e
2. With each press of Button B while keeping Button C
pressed, the engagement and disengagement of the
alarm and the hourly time signal are made as follows:
Alarm and hourly time signal
are disengaged.
Alarm is engaged.
Hourly time signal is
disengaged.
H O W T O S T O P T H E A L A R M
The alarm rings at the designated time for 30 seconds
and stops. However, the alarm can be stopped manually
by pressing Button C in any display.
A L A R M T E S T
The alarm can be tested with a beeping sound by
pressing Buttons B and C at the same time in the time/
calendar display.
H O W T O U S E T H E S T O P WAT C H
S p l i t
i n d i c a t o r
S t o p w a t c h
i n d i c a t o r
A
M i n u t e
S e c o n d
1. Press Button A to show the stopwatch display. (The
stopwatch indicator starts flashing.)
The stopwatch can measure up to 24 hours and is
displayed in minutes, seconds, and 1/100 seconds
up to 40 minutes, and in hours, minutes, and seconds
after the first 40 minutes. (The 1/100 second
B
indicator flashes during the first 40 minutes.)
C
When the measurement is over 24 hours, the
stopwatch will be reset to "0:00oo" and start counting
again.
2. Reset the digits to "0:00oo" before using the
stopwatch. When the split and the stopwatch
indicators are flashing, press Button B to check that
the stop indicator starts flashing, and then press
Button C twice to reset the digits to zero.
3. When measuring a long period of time, return the
stopwatch to the time/calendar display after the
stopwatch starts to prevent any possible mistaken
operation.
* When Button B or C is pressed in the stopwatch
display, a single "beep" sounds to confirm the
operation.
Accumulated elapsed time measurement
B B B
S t a r t S t o p R e s t a r t
** Restart and stop can be repeated by pressing Button
B.
Split time measurement
B C C
S t a r t S p l i t
S p l i t
r e l e a s e
** Measurement and release of split time can be
repeated by pressing Button C.
Measurement between two competitors
Finish (First runner)
B
C
S t a r t
S t o p
F i n i s h
time of 1st
c o m p e t i t o r
Alarm is disengaged.
Hourly time signal is engaged.
Alarm and hourly time signal
are engaged.
S t o p i n d i c a t o r
1 / 1 0 0
s e c o n d
i n d i c a t o r
B: Start/Stop
C: Split/
Split release/
Reset
1 / 1 0 0 s e c o n d
B C
**
S t o p R e s e t
B C
**
S t o p R e s e t
Finish (Second runner)
B C C
F i n i s h
R e s e t
time of 2nd
c o m p e t i t o r