Zenith Z44SZ80 Installation And Operating Manual page 8

Zenith operating guide dlp projection z44sz80, z52sz80
Hide thumbs Also See for Z44SZ80:
Table of Contents

Advertisement

Introduction
There are four jacks on the left side on your projection TV
that make connecting Audio/Video devices like video
games and camcorders very simple.
The jacks are like those found on the back jack connection
panel. This means that most equipment that connects to
those types of jacks on the rear jackpack, may be connect-
ed to the front connection panel.
To use the side jacks as the signal source, select them
using Main Input menu as described on page 23. They will
be named "Front Video" in the Main Input menu.
If you input both Front Video and
S-Video, only the S-Video will
work.
If you're connecting a video game
device, make sure to change the
picture settings with the EZ
Picture option in the Video menu
(see page 24).
Mini glossary
A/V CABLESAudio/Video cables. Three cable connector—Right audio (red), Left audio (white), and Video (yellow). A/V cables are
used for stereo playback of videocassettes and for higher quality picture and sound from other A/V devices.
A/V DEVICE Any device that produces video or sound (VCR, DVD, cable box, or television).
8 DLP Projection TV
Front Connection Panel
Front Connection Panel
LEFT/RIGHT
AUDIO
Used for stereo
sound from vari-
ous types of
equipment.
VIDEO
Connects the
video signals
from any piece of
equipment.
Front A/V Panel
S-VIDEO
A connection
available on
some very high-
end equipment
that provides bet-
ter picture quality
than video input.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Z52sz80

Table of Contents