Safety Cut-Out; Tips On Cooking And Frying - Zanussi ZKT 652 DX Installation And Operating Instructions Manual

Safety cut-out

Cooking surface
• If after switching on the cooking surface, a heat setting is not set for a
cooking zone within approx. 10 seconds, the cooking surface automati-
cally switches itself off.
• If all cooking zones are switched off, the cooking surface automatically
switches itself off after approx. 10 seconds.
Control panel
3
Moisture (e.g. a wet cloth) or liquid boiling over onto the control panel imme-
diately switches all cooking zones off.
Induction cooking zones
• In the case of overheating (e.g. when a saucepan boils dry) the cooking
zone automatically switches itself off.
again the cooking zone must be set to
• If cookware that is not suitable is used,
ter 2 minutes the display for the cooking zone switches itself off.
• If one of the cooking zones is not switched off after a certain time, or if the
heat setting is not modified, the relevant cooking zone switches off auto-
matically.
be set to 0.
Heat setting
1 - 2
3 - 4
5
6 - 9

Tips on cooking and frying

3
Information about acrylamides
According to the latest scientific research, intensive browning of food, espe-
cially in products containing starch, may present a health risk due to acryla-
mide. Therefore we recommend cooking at low temperatures and not
browning foods too much.
38
is displayed. Before being used again, the cooking zone must
Switches off after
6 hours
5 hours
4 hours
1.5 hours
is displayed. Before being used
0
and allowed to cool.
lights up in the display and af-