Advertisement
Quick Links
ENFORCER Video Amplifiers
Troubleshooting:
Video amplifier does not
• Make sure the power, input, and output cables are connected
function correctly:
firmly to the amplifier.
• Make sure the video input device is turned on.
• Make sure the video output device is turned on.
• Test the coaxial cable between the video input and the
amplifier to make sure it is functional.
• Test the coaxial cable between the video output and the
amplifier to make sure it is functional.
Power LED indicator not lit:
• Make sure power is connected to the amplifier.
Also Available from SECO-LARM:
Passive VGA Balun
MVE-SV010Q
SECO-LARM
®
has a complete line of security products.
Please visit
www.seco-larm.com
WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM's obligation is
limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This
Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair, or
alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such
equipment is not operating properly as a result of causes other than defects in material and workmanship. The sole obligation
of SECO-LARM, and the purchaser's exclusive remedy, shall be limited to replacement or repair only, at SECO-LARM's
option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property
damages of any kind to the purchaser or anyone else.
NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the
SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right to
change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2013 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or in
part, without the written permission of SECO-LARM.
®
SECO-LARM
U.S.A., Inc.
16842 Millikan Avenue, Irvine Ca 92606
Tel: 800-662-0800 / 949-261-2999
Fax: 949-261-7326
Passive Video Balun
BNC-to-VGA Converter
EB-P501-01Q
VC-1BAQ
for more information.
Website: www.seco-larm.com
Email: sales@seco-larm.com
MiVA-2xxxB-xQ_1307.docx
SECO-LARM U.S.A., Inc.
VA-2101B-WQ
VA-2101B-WAQ*
1-In, 1-Out
• Compatible with both color and
B/W signals
• Transmission distance up to
3,280ft (1,000m)
• Connect to a video camera,
multiplexer, DVR, etc.
*
VA-2101B-WAQ and VA-2404B-WAQ do not include a power adapter.
PITSW4
NOTE: Products with model numbers that end with "Q" or products that have a round green "Q" sticker signify RoHS compliance.
Video Amplifiers
Manual
VA-2404B-WQ
VA-2404B-WAQ*
4-In, 4-Out
• Gold-plated BNC connectors
• Sharpness and brightness
adjustments for each channel
• 12VDC Power adapter included
• Pass-through circuit: Power output
can power nearby devices
Advertisement
Summary of Contents for SECO-LARM ENFORCER VA-2101B-WQ
- Page 1 VA-2404B-WAQ* service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This...
- Page 2 Brightness To ensure proper operation of the control knobs Sharpness Brightness connected devices, first check the control knobs voltage present at the terminal blocks. Sharpness Power loop out Video output SECO-LARM U.S.A., Inc. SECO-LARM U.S.A., Inc.