Setting The Sleep Timer - Yamaha RX-V1070 Owner's Manual

If you use the SLEEP timer of this unit, you can set this unit to be turned off automatically. When you are going to sleep while
enjoying a broadcast or other desired input source, this timer function is helpful.
Notes
The SLEEP timer can be controlled only with the remote control transmitter.
The components on which the SLEEP timer is effective are the sources connected to a SWITCHED OUTLET on the rear panel
of this unit.
To set the SLEEP time
1
SLEEP
Flashes on and off continuously.
Select the desired SLEEP time. Whenever the SLEEP key
is pressed, the SLEEP time will change as follows.
120
The SLEEP timer is OFF.
(The indication before the
SLEEP key is pressed.)
After a while, the display returns to the indication before
the SLEEP timer is set, and the "SLEEP" indicator stops
flashing and illuminates.
2
The unit will be turned off automatically after the
passing of the SLEEP time you selected.
24

SETTING THE SLEEP TIMER

Indicates the SLEEP time.
(Minutes)
90 60 30
To cancel the selected SLEEP time
SLEEP
Goes off.
Press once when
the SLEEP time displays 30.
Returns to the indication
before the SLEEP timer
is set.