Selecting The Speaker System - Yamaha RX-V1070 Owner's Manual

Natural sound stereo receiver
Hide thumbs Also See for RX-V1070:
Table of Contents

Advertisement

Adjusting the BALANCE control
Adjust the balance of the output volume to the left and right
speakers to compensate for sound imbalance caused by
speaker location or listening room conditions.
Note
This control is effective only for the sound from the front
speakers.
Adjusting the BASS and TREBLE
controls
BASS
BASS
: Turn this clockwise to increase (or counter-
clockwise to decrease) the low frequency
response.
TREBLE : Turn this clockwise to increase (or counter-
clockwise to decrease) the high frequency
response.
Note
These controls are effective only for the sound from the front
speakers.
When you listen with headphones
Connect the headphones to the PHONES jack. You can listen
to the main sound through headphones. When listening with
headphones privately, set both the SPEAKERS A and B
switches to the OFF position.
16
BALANCE
TREBLE
PHONES

Selecting the SPEAKER system

Because one or two speaker systems (as front speakers) can
be connected to this unit, the SPEAKERS switches allow you
to select speaker system A or B, or both at once.
SPEAKERS
Using the TONE BYPASS switch
Press this switch to revert instantly to the flat states of the
BASS and TREBLE controls without changing the setting of
these controls.
Using the BASS EXTENSION switch
You can boost bass frequency response by setting this switch
to the "ON" position. This switch is effective only on the sound
from the front speakers.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx-v1070/870Rx-v870Rx-v1870

Table of Contents