Input Mode; Input Trim - Yamaha YSP-4000 Owner's Manual

ii', H.iC'IIT
iii:':
T
i~~.iML~,1T
iiiliil. ii. I • l l I JiillL.11
HDt-1!
.. HNlI 1 • • •. i=lu>a
( i=lu>a
HDt-1I2· ••• [AJD
( [AJD
["]/[T]:Up/Doo,m [-tI]/[It-]:Sel
[EtHER]: Retur'n
+
H ' · :";
r
f,j C ' l j ' T
H'·":'~
r
!J··~,jr:jEI~.IT
?,/,"r."1
I "
.111 '.
I .'.'.'
1111 11 _
COI'lPOt·lENT
.. Li
ne 1· ••• TI)/STB
( nVSTB
Line2···· DI')D
( DI')D
["]/[T]: Up.,·Doo,m [-tI]/[ ... ]: Sel
[EtHER]: Ret.ur·n
+
["]/[T]: Up/Do~m (-tI]/( ...]: Sel
[EtHER] : Return
• INPUT MODE (Input mode)
Use to designate the input mode for the input sources
connected to the DIGITAL IN jacks when you tum on the
power of this unit. For information on the types of audio
signals that can be output by this unit, see "Selecting the
input mode" on page 93.
Choices: AUTO, LAST
lo-i=lUTO Li=lST
(-tI]/( It-]: Select
[ENTER] : Retur'n
• Select AUTO to set this unit to automatically detect the
type of input signals and select the appropriate input
mode.
• Select LAST to set this unit to automatically select the
last input mode used for that input source. If the type of
input signals is different from the setting, no sounds
will be produced.
MANUAL SETUP
• INPUT TRIM (Input trim)
Use to adjust the input level of the input source.
.. nVSTB i=ltli=lLOG··· -3 .OdB
[)IGITi=lL· • -3.0dB
DI)D DIGITi=lL··-3.0dB
["]/[T]:Up/Down [-tI]/["']:Sel
[EtHER] : Return
• Select TV/STB ANALOG to adjust the level of audio
and video signals input at the TV/STB AUDIO IN
jacks of this unit.
Control range: -6.0 dB to 0.0 dB
Initial setting: -3.0 dB
• Select TV/STB DIGITAL to adjust the level of audio
and video signals input at the TV/STB OPTICAL
DIGITAL IN jack of this unit.
Control range: -6.0 dB to 0.0 dB
Initial setting: -3.0 dB
• Select DVD DIGITAL to adjust the level of audio and
video signals input at the DVD COAXIAL DIGITAL
IN jack of this unit.
Control range: -6.0 dB to 0.0 dB
Initial setting: -3.0 dB
• Select AUX 1 ANALOG to adjust the level of audio and
video signals input at the AUX I AUDIO IN jacks of
this unit.
Control range: -6.0 dB to 0.0 dB
Initial setting: -3.0 dB
• Select AUX I DIGITAL to adjust the level of audio and
video signals input at the AUX I OPTICAL DIGITAL
IN jack of this unit.
Control range: -6.0 dB to 0.0 dB
Initial setting: -3.0 dB
• Select AUX2 DIGITAL to adjust the level of audio and
video signals input at the AUX 2 COAXIAL DIGITAL
IN jack of this unit.
Control range: -6.0 dB to 0.0 dB
Initial setting: -3.0 dB
• Select AUX3 ANALOG to adjust the level of audio
signals input at the AUX 3 input jack on the front
panel.
Control range: -6.0 dB to 0.0 dB
Initial setting: -3.0 dB
• Select DOCK ANALOG to adjust the level of audio
signals input at the DOCK terminal of this unit
(U.S.A.• Canada, and Australia models only).
Control range: -6.0 dB to 0.0 dB
Initial setting: -3.0 dB
85
En
•