Erasing Songs; Erasing Tracks - Yamaha MD8 Owner's Manual

68
Editing Songs & Tracks

Erasing Songs

The Song Erase function allows you to erase individual songs, which may be necessary to
make room for new material you wish to record.
1. Press the [EDIT] button and use the DATA dial buttons to select the Song
Erase function.
2. Press the [ENTER] button.
The display shows Song No.1 .
3. Use the DATA dial to select the song you want to erase.
For example: Song No.3 .
4. Press the [ENTER] button.
The display shows Erase EXE?
5. Press the [ENTER] button to erase.
Press the [EXIT] button to cancel.
The selected song is erased and subsequent songs are renumbered. Writing TOC appears
on the display as the TOC is updated. The erased area becomes a recordable blank area.

Erasing Tracks

The Track Erase function allows you to erase individual tracks.
1. Press the [EDIT] button and use the DATA dial to select the Track Erase
function.
2. Press the [ENTER] button.
The display shows ********Tr .
3. Use the CURSOR shuttle to select tracks and the DATA dial to set the
tracks to be erased.
For example: *2**5***Tr . If you like, you can erase more than one track at a time.
4. Press the [ENTER] button.
The display shows Erase EXE?
5. Press the [ENTER] button to erase.
Press the [EXIT] button to cancel.
You can abort the Track Erase operation at anytime by pressing the [STOP] button. Data up
to the point that you pressed the [STOP] button is erased.
MD8—Owner's Manual